Blue Ox Base Plate Kit - Removable Arms
This item does not fit your vehicle
2009 Volvo C70
These items fit your vehicle
2009 Volvo C70
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you like keeping a clean, factory look when you’re not towing, this setup gets it right. The hidden design sits flush with the front end, and the removable arms come off with a simple twist, leaving nothing sticking out. When the arms are off, receiver covers plug the openings to keep dirt and debris out and give it a finished look. The brackets won’t protrude past the front, so you won’t be bumping your legs when walking by.
Connecting your tow bar only takes a few seconds. Each arm slides into the receiver, twists to lock, and secures with a pin. When you’re done towing, pull the pin, rotate the arms to release, and remove them. It’s a straightforward process whether you’re hitching up solo or with help.
Built from durable powder-coated steel, this base plate bolts directly to the chassis—no welding required. The sturdy design spreads towing force evenly across the frame to help prevent stress on your suspension. That kind of strength gives confidence for cross-country hauls or repeat weekend trips alike.
This base plate pairs directly with Blue Ox tow bars for a reliable connection every time. If you’re running Roadmaster or Demco equipment, adapters (RM-031 or RM-031-5 for Roadmaster, DM9523041 for Demco) are sold separately to make your setup work seamlessly. Integrated mounting points let you attach an electrical connector plug bracket (sold separately) to keep your wiring organized up front.
You don’t need to weld anything or get custom fabrication done. The kit bolts securely to the chassis using the included mounting hardware, so installation is clear-cut and approachable for hands-on owners. Specs are distance between brackets: 34" and bracket height: 20", helping you plan your setup precisely before hooking up your tow bar and cables.
Ratings & Reviews
Well designed and solidly built base plate. Very good product support from Etrailer and Blue Ox.
The four 1/2 inch by 1 3/4 inch bolts are category 5 bolts. I had a bag full of identically sized bolts which were category 8. But I did not have any whizz nuts that were category 8 nuts so I stayed with the standard Blue Ox Hardware. We used POR 15 rust preventing paint at every location where we cut the steel or drilled holes. The distance from the center of the attachment tab assembly holes to the ground is 20 inches on our 2025 Wrangler Rubicon JLU with "Xtreme" 35 inch tire package. Easy five stars for Blue Ox and etrailer.
The 2025 Trax license plate frame sits lower than shown in the instructions provided with this kit, to the point where it obstructs access to the 7-way electrical connector. An alternate scheme for mounting the plate will be required if your state requires the front plate to be displayed.
The Blue Ox base plate kit was installed without a hitch on our 2024 Maverick Hybrid. It was a perfect fit! It was installed by Fantasy Truck, a referred installer of etrailer, in Odessa, MO. Brett was very easy to work with and did an excellent job! I highly recommend the Blue Ox baseplate and Brett @ Fantasy Truck!
Fits my 2013 mini cooper non turbo. Does take a few hours to install this Fit was good. The hardest part is removing the front bumper and reinstalling it. You do have to cut the lower bumper grill in three places take your time locating the exact spots for cuts. I have pulled Mini Cooper about seven thousand miles now with this Blue Ox and has worked great
I was given a Blue Ox Tow Bar and needed Base Plates for my Ford F150. In my online search, E-Trailer had the best price, so I ordered them. Delivery was a few days earlier than expected. I read the installation instructions and it sounded fairly simple to install, so I decided to tackle it myself. I began it about six pm and had the job completed and cleaned up in just over two hours. The job required removal of the bumper and tow hooks and drilling of two holes. Also William at E-trailer was of great help in the correct parts and keeping me informed of the delivery.
The safety Cable installation left a little to be desired. I'm not sure if I installed it as designed. The cables we're really long enough to go aroiund the frame rails on our Jeep, under the Radiator mount, Aluminum Frame, I was only able to go around the Raditor mount on both sides. Didn't really seam like it was the right way, but I suspect it's only for if something comes loose that there isn't a catastrophic breakaway.
After installing over 500 baseplates on various vehicles, this one was probably the toughest one . It had the off road package on it . But it fit great after I had to remove a lot that had been bolted up for 27yrs.
Tried to install this baseplate. It was a challenge to say the least. It did not fit the frame of my Jeep YJ without making modifications to the mounting plates on the driver side. I had to use a cut off wheel and remove 3/16 of an inch from the driver side spacer (which is too long. See pictures) in order to get it to clear the frame. Also, instructions say to drill an additional 1/2 inch hole in the frame for a third mounting bolt. BUT....the internal frame construction doesn't allow the nut on a stick to pass under the existing reinforcements for the bolts that mount the steering gear to the frame. Nut is way too thick to pass under the internal tubing in the frame from manufacturer (AMC).
This was instilled on a 2024 Chevrolet Colorado Z71 truck. I watched your video online with this exact model truck and the words I remember most was “and we did not have to do any trimming”. Well my truck was certainly different than what was on video. Guess it’s because it’s a late build 2024 (end of September 2024) and the grill system was maybe what would appear on the 2025 models? There was lots of trimming involved. I also will tell you the mounting holes both for the frame and the bumper back plate did not line up and required some modifications to fit. I would like to say this job is not for the faint of heart. I luckily have a mechanical/machinist background so was able to get the job done. Have not tested it yet but will be soon. Good luck to those of you who are planning on installing it yourself. Just remember it can be done. Just take your time.
Items arrived in 2 days, free shipping. All appeared in new undamaged condition.
The Blue Ox base plate for my 2015 Kia Soul is well manufactured and, with a little bit of mechanical skill, easy to install. It fit perfectly without issues. Brad from etrailer provides a step-by-step installation video that is outstanding and nicely guides through the process from beginning to end. I highly recommend this Blue Ox base plate from etrailer.
Well the blue ox base plate actually fits my turbo engine. The Curt didn't fit as advertised.
Super high quality baseplate for towing by Blue Ox. Instructions, videos, shipping (one day!) and overall experience was awesome. A bit pricey but their quality and the additional support by E Trailer cannot be beat! BTW (E Trailer) the baseplate fits three different Jeep configurations but did not call out the Recon package. After looking at other brands which showed there's to fit the 3 variations AND the Recon, I figured it would fit and it DID. You should definitely upgrade to include the Recon Edition.
lways great to shop at etrailer, especially the tech experts. Royce did an awesome job with our order. Everything fit perfectly and the help video provided the guidance I needed.
We installed the baseplate on our 2023 Encore GX AWD as well as the light harness and breakaway switch. A couple of items were incorrect but Royce corrected the issues with no problems.
Thanks again etrailer!
2019 Ford Ranger baseplate worked and fitted fine for me. 73 yrs old took me a couple hours but took many breaks. Younger could do it less than hour I'm sure.
Also works fine with my Blue Ox tow bar.
GOOD JOB GUYS
Impressively Great Service
Great product excellent delivery from e tailer
Worked well. Fit perfect. Would buy aga in
I have not got to take the box apart yet, but this is the fourth item that I have bought from blue ox and I have been extremely satisfied with their product. I ordered the product from your company because I enjoyed speaking to a live person. I tried to do that with your competitor and was unable to do so. As a matter of fact, I plan on calling you tomorrow and ordering something that I forgot.
installed on 2014 f-150 king ranch. it took about 1 full day to
complete. the hardest part is getting a drill in position to drill
the required 8, 1/2 inch holes. (angle drill works best) I think
the unit is over built considering each side is bolted on with
7, 1/2 inch diameter bolts. instructions aren't the best I've
ever seen but if you study them you can get the job done.
VERY HAPPY WITH THE SERVICE FROM etrailer.com
Was sent all the correct parts the first time. Blue ox must have had a bad run of coatings and my tow bar started to flake off. Blue ox sent a new one before I even had time to finish all the wiring, great service from both companies.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Road R.
9/12/2015
works great. towed the truck several times with no problems