To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These 1,000-lb capacity truck bed rail tie down anchors stay out of sight and out of the way when you don't need them and snap up when you want to haul. The 35-degree angle provides a stronger direction of pull when securing large gear.
Features:
Specs:
Whether you have open stake pockets or pop-out rail caps, it only takes a few seconds to install these BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the stake pockets, and tighten them down with a Phillips head screwdriver.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. And today we're gonna take a look at these BullRing Flush Angled Retractable Tie-Down Anchors for your truck beds stake pockets. These heavy duty anchors are going to attach to your truck beds stake pockets and give you tie down points to secure your load working with S hook and J hook connections. Now these are custom fit anchors that are going to fit various years and versions of the Ford F series trucks. To confirm that these are going to work for your truck, take advantage of our vehicle fit guide here at eachtrailer.com.
Input the year, make, and model of your truck, and our fit guide will let you know if these will work for you, or if we have something comparable that will work for you. Now, while the factory anchor points are inside the bed of your truck where it can be hard to reach, these retractable anchor points are going to install into the stake pockets on top of your bed rails. You're gonna simply pop the anchor ring up when you want to use it to secure your load. And then when you're done, you just push it down firmly, and make it flush, and then it's outta your way. Now again, let me show you just how simple these are to use.
Once you have these installed, it's just gonna be very simple to use. You just pull this ring up firmly, you hear it click or pop into place. That's gonna be secured. It's not going to go down by itself. It's gonna stay up as long as you need it to secure your strap and once you are done, and you don't need these hooks anymore, you don't have to leave them out there just sticking up.
You can just push it down firmly and it is gone and out of your way. Very easy. Very convenient to use. I do wanna mention that this angled anchor ring is going to provide a better pull angle and more strength for you. The flush fit is compatible with most tonneau covers and these anchors have a weight capacity of 1,000 pounds.
They're constructed of stainless steel. So that's gonna resist rust and corrosion and the nylon lower body is going to reduce sound. And the top cover is going to match the grain and color of your Ford bed rails, giving you that nice factory look. Now not only are these really easy to use, but I'm happy to say that the installation is going to be very quick and easy as well. And really it requires nothing more than a Phillips head screwdriver. So when you install these, you wanna remove any plastic caps that cover your stake pockets. And then you're going to use your Phillips screwdriver and loosen the top screw here at the top of our anchor there, and hopefully you can see that there. And for our purposes, I went ahead and loosened this screw. And so you loosen it, and then you just remove the screw, and then you are going to hold onto this top black cover. And when you remove that screw, it's going to let this bracket hang down, this steel plate, just hang down here. And you're not gonna have to worry about this becoming detached from this ring. It is permanently attached there. So you don't have to worry about losing that steel plate in your stake pocket. So then holding onto this top cover, you're gonna guide the anchor into the stake pocket. You'll probably have to put it in at an angle. And then once it's in that stake pocket, you're going to pull up until this lower bracket makes contact with the sheet metal in your truck. And then once that happens, you're just going to hold onto this ring, and then allow the cover to drop into place. And then you just replace your screw and tighten. So it's going to be that simple. It's gonna be very easy to install and you're gonna have these installed in no time. Now when you're tightening the screw, it is important to note that you don't want to over tighten the screw. If your plastic rail cap is beginning to bend or bow, then that's an indication that it is too tight, so you do wanna make sure that you do not over tighten. Now you are going to get a set of six, but if you don't need that many, we do also offer these in a set of four. And I am including our item number for that set of four on your screen. Just take that item number, and put it in the search field of our website here at etrailer.com. And it'll take you to that set of four. Overall, I'm really impressed with these anchors. They're gonna be, once you have them installed, again, very easy to use. When you need that ring, you just pop it up. And when you don't, you push it down. It's out of your way. And I'm probably even more impressed with how easy these are to install. So that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
These 1,000-lb capacity truck bed rail tie down anchors stay out of sight and out of the way when you don't need them and snap up when you want to haul. The 35-degree angle provides a stronger direction of pull when securing large gear.Should have checked his truck bed first to only order four instead of six units. It would be nice if there was an order box to check if item was purchased as a gift to be a surprise for recipient. The units were an easy installation, and work well for securing loads
Delivered two days early. Product works/fits perfectly.
Great product
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Duane
10/19/2023
Little more difficult getting my finger in to pull up ring than I hoped for. Other than that they work great