To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These heavy-duty retractable anchor rings serve as tie-down points for securing your load. The spring-loaded design enables the chrome-plated anchor rings to snap up or down. They have easy, no-drill installation in your truck bed stake pockets.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Good fit, sturdy tie downs for a great price!
The installation was as expected but the tie down part does not work smoothly and you have to use a screw driver to raise it
Tie-Downs were exactly as described. They work great. Easy to install, even with the upper plastic bed rail. I like that they lock in the Up position. I use them all the time when my Wife & I go biking. I built a bike rack for my truck and just use tie down cables to hold the bikes in place using the Anchors!
I give it a 4 because the front did not fit but I think it is because of the lousy design of the side rail guard that came with the truck when I bought it. As you can see in the pictures the before and after of the rear. You can also see the difference of alignments of the holes from front to rear. The only way I can get the front to fit is to either cut the rail guard or the metal of the truck. Searching the web I found other complaints about this same issue with other guards. I do so far recommend the Erikson but you will have do some modifying. It's not plug and play.
Also I wasn't happy I went through the trouble to put this review on a sitejabber site. After filling it all out, it asked me to log in or register. No time for that.
Very good quality and easy to install. I would have bought four except the toolbox is covering the front two holes. So I bought item WTD-823 to mount right behind the toolbox.
Added these to the snowmobile trailer so that we could use it to tie down other items. Work great and we’re easy to install. Bought and sprayed a undercoating to protect my investment further.
The order shipped quickly, arrived on time, and was exactly what I needed.
Got what I ordered on time. Great exper ience!
I have an older Ford F150 with an eight foot bed. I have three stake pockets on each side and installed one of these in each stake pocket. The rings are a little difficult to "pop up" after they have been down for a while but their usefulness far out weighs any little quirks. ( A shot of silicone spray once in a while helps with this.) I was even able to carry a 21 foot long awning strapped to the side of my truck with the help of these tie down anchors. I would highly recommend these and buy them again if I needed to. Have several friends that have purchased these with my recommendation and they are all happy with their purchase.
The tie down anchors are high quality, look great and easy to install. I have a 2002 Ranger but had the bed replaced with a 96 bed. So I was unsure if the fit but they worked perfect. I ordered another pair for the other 2 opening. Very, very pleased with this product!
The WeatherTech Mats fit nicely in my GMC 2011 Sierra. Unfortunately my truck does not have the in floor anchor points, so the mat still slip and slide. I have not a chance to use the Erickson Retractable Tiedown Anchors yet. However, they have a snug fit in the truck bed stake pockets. I like the function of retracting. The DeeZeee Tailgate Lowering bracket is not working well. The installation of the Blind Nut is not going well. The washer and bearing of the Blind Nut tool system is allowing the Blind Nut bolt to tighten and compress the Blind Nut into the tailgate. The Blind Nut keeps turning as the Wrench is being turned.
Great product, installed 6 on my 1997 f-350 to replace cheap tie downs that kept breaking and pulling out of the stake pockets, use them primarily to tie down dirt bikes, installation was very simple, did have to trim the inside anchor slightly on the front tie downs due to the inside dimensions of the stake pockets,
Work fine with my truck. A lot of give when using tie downs so keep the ratchet tension low.
Jenny N.
3/11/2022
I checked with the manufacturer and you want to make sure that the anchor is not damaged and mounted securely before every use. And to make sure not to exceed the 1000 pound weight capacity.
They the fit was perfect for my 2003 F250. Easy to install.
These offer more options for tie down points in the back of the truck. I'm skeptical of their 100lb rating, but they work pretty well, just be careful when using ratchet straps, I bet you could bend sheet metal around your stake pockets a split second before the plastic on these gives up.
I don’t need them everyday and I don’t need them every time I haul something in the bed of my truck, but when I do need them…to tie something down or hold something in place, I’m glad to know that they are right there, ready to be used!
I received and installed two Erickson tie down anchors in my 2013 Dodge Ram 1500 today, at the 2 rear bed locations where cutouts were already open. I have a stock drop in bed liner from Dodge and the pre-cut holes were slightly smaller than the tie down anchors. This was solved with a rubber mallet and piece of 2x4 to squarely and carefully hammer the anchor thru the tight opening. I did also have to completely remove the two screws that lock down the anchors in order to manuever them into the opening (a bit difficult but they do go in fine). One thing to note, once they go in, it would be very difficult to remove them if you encounter a problem. Very strong and tight once in and screwed down.
works very well to keep debris from the stake pockets, I often haul loads of sawdust and don't want the sawdust filling the stake pockets. For me it's a little difficult to raise the tie-down loop but the loop stays in the raised position until you push it down. I have secured several large loads of firewood with the tie-downs and they were more than adequate.
Works great.. easy to install convenient and like that they're flush with the top of the truck bed.
Francesco N.
10/25/2020
Still working great!!
Great quality product . Easy to install. I used portaband saw to cut to length. Used pre drilled holes and used a standard hole saw where I needed extra holes, along with standard drill bits. The material drills and cuts perfectly. Nice quality product. This was being used to replace my work out bumper on my horse trailer. Looks like oem replacement .
I originally ordered two of these for the rear of the truck bed but like the quality of the product I bought two more for all the bed pockets. Perfect fit and fold flat with the top of the bed. Made out of stainless and after a salty winter here in the northeast NO rust.
Etrailer does it again. The retractable tie-down anchors for my 2005 Ford F150 XLT truck are the best tie-downs for the money. Easy to install and look great.
When I ordered three sets of these the information was that they were not confirmed to fit a 2015 RAM 3500. They do indeed fit and with the factory bedrail liners. To get them in there the screws have to be completely removed. Everything stays assembled do you don't have to worry about dropping the internal parts into neverland. Once inserted pull up on the ring and reinsert the screws. Pretty easy once I figured it out. Using these with a Bak Flip four-fold cover which allows the cover to be closed and locked and still have access to a tie down point for kayaks.
Work great and look great. Had to trim my truck's bedliner back a tad to get them in but they are a cinch to install.
Very good product, just don't over tighten the screws. They will drill a hole through the plastic cap. I had to insert washers in the last one to install it on my truck. My problem, not the product, read the installation instructions,
DON"T Over tighten the screws. I installed 6 on my truck. Got in a hurry and over tightened the last install.
Do you have a question about this Truck Bed Tie Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Anthony
7/6/2022
Great, no issues I use the tie downs all the time