Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is rated for 31,000 lbs GTW, giving it the strength to handle even the heaviest fifth-wheel trailers with ease. The heavy-duty steel build and corrosion-resistant powder coat finish create a hitch that stays solid and dependable on long hauls. It’s designed for people who expect a quiet, stable connection every time they hook up.
Instead of the looser fit of a two-piece design, this hitch uses a wraparound, single-piece jaw that completely surrounds the king pin for full 360-degree contact. That tight connection means less rattle and nearly no chucking. A 3/4" thick solid steel locking bar adds an extra layer of protection by reinforcing the king pin hold, automatically locking as soon as the jaw closes. Together, they deliver a smoother, more secure towing experience from start to finish.

The double-pivot head moves both front to back and side to side so it can follow the trailer naturally over uneven roads and sharp turns. Three polyurethane dampeners cushion that movement and absorb road shock, keeping things quiet and controlled even on bumpy stretches. Hookup is easier too—the head automatically pivots into position when it meets the pin box, so lining up feels smooth instead of forced.


Setup is straightforward thanks to adjustable side plates that let you choose from four height positions between 16" and 19". Once dialed in, drop the base right into your truck’s underbed mounts and lock it down with the integrated handles and pins. When you want your bed back, just release the handles and lift it out—no tools required. It’s a clean, rail-free design that makes switching from towing mode to open-bed mode quick and easy.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Demco Hijacker UMS Double Pivot 5th Wheel Hitch. This 5th wheel hitch will mount into the bed of your 2016 through 2019 Chevrolet and GMC trucks with the factory installed towing prep package, and this will obviously then allow you to then tow your 5th wheel trailer with your tow vehicle. It is gonna be very easy to get installed since we're using that factory prep package, we'll just pull out the pins on all four of these feet, we'll open them up and then set them down into the four receiver pucks that are built in to the factory underbed rails. Once they're all installed, we'll just turn those to lock them in place, and we'll pass our pin through there, so it is going to allow us to take full advantage of that factory prep system, and so that we don't have to worry about above bed rails, so we're gonna have full bed access just like our truck is intended for. This does have a sturdy steel construction, so it is going to give us a gross towing weight of 31,000 pounds.
That steel construction does have a black powder coat finish on it to resist rust and corrosion. Up here at the top, you can see we've got our wraparound, single-piece jaw that's gonna provide a secure connection to our king pin, and we lock it open there, it's gonna make it very easy for us to back up, and as soon as that king pin hits that trigger plate there, it's going to wrap around, 360 degrees of contact, and so, it's gonna be less rattling, more security than your slide bar type jaws. As you can see, we also have this 3/4 inch thick, solid steel locking bar that's gonna reinforce the connection of our coupled trailer, so we're automatically gonna have that lock in place when the jaw closes. We're operating that using our spring loaded handle here with the comfortable grip that's going to allow us to very easily pull that to lock it in place, so we can back up to our trailer and get the king pin in place. Once it closes, snaps close automatically, we'll then pass this pin through the hole here and get it secured in place like so.
Then, to disconnect, reverse that process, pull out the pin, open it up, and then they do recommend passing that pin back through this hole here just in case that trigger plate we're to be activated, it's gonna keep it open for you, so you don't have to worry about pulling your trailer forward when you don't want to, and then you can easily move that pin and allow it to close back up. Our head here is our double pivot design, so it's going to pivot forward and back as well as side to side, so it's gonna make it much easier for us to get hooked up and help limit chucking. We do have cushioned polyurethane dampeners, might be kinda hard to see those, they're blue inside there. That's going to help reduce the noise and absorb road shock as we're going along. We're also gonna have four different height settings to fit different applications, so depending on where you mount this saddle bracket here, you've got several different holes to choose from, so you have a height adjustment range from 16 inches to 19 inches just by determining where to mount those bolts, so make sure that you're getting that set for your application, it's nice that they give you those options, so that we can fine tune it for different applications.
This is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So if you do have that 2016 to 2019 Chevy and GMC truck with the factory prep package, this is gonna be a really great way to take advantage of that factory prep system to pull your 5th wheel trailer. And that completes our look for today. Again, I'm Michael with etrailer.com, thanks for watching..
Ratings & Reviews

Gwendolyn Y.
3/26/2026
Looks great, Cody. Where are you headed to first?

Don D.
4/12/2018
The hitch functions great but the finish is peeling off in places.

Phillip Z.
7/17/2017
After a year, my only complaint is still paintcoating.

Leslie P.
2/26/2017
Still very satisfied with the fifth wheel. Weve towed our 42ft fifth wheel with it several times without any problems with the hitch. Hopkins up and unhooking with no problems at all. We would highly recommend this product.

Troy
9/14/2019
Fantastic after a full year of use. 5er weighs 16k and no lurching. Also very nice when parking on an un level surface... Just hook up and go! I have done 9 trips with about 5k total miles so far. It is very easy to remove-even after back surgery. Highly recommend.

Mike L.
11/5/2018
The Demco Hijacker is compatible with any standard pinbox, and should work well with your new fifth wheel.

Jesse
2/17/2020
One year down and I am going strong with several more in the future! I have no complaints with this hitch. I recommend it to everyone that asks about it. Thanks again.

Mike
4/26/2020
Product still works great. Been almost 2 years and many thousands of miles. Product still looks great as well. Great job Demco.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Robin H.
10/7/2026
Thanks for the detailed review! Glad to hear the installation went smoothly and you're happy with the features of the Demco hitch. Being able to remove the head separately definitely makes getting it in and out of the truck more manageable.