What's The Recommended Lube Plate For Demco UMS 31k 5th Wheel Hitch?

Question

Question:

Do you have/recommend a lube plate for the Demco 31k fifth wheel hitch?

asked by: Michael H

1

Helpful Expert Reply:

We sure do!

For your Demco UMS 31k 5th Wheel hitch # DM97GV I recommend going with the Lippert # LC286160. This plate has the correct 3/16" thickness for your exact hitch.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

1

Answer 1

The Pace Edwards Switchblade part #311-SWD7936 would be a great option and what I would recommend for your 2020 Ram 3500 long bed. This is a retractable cover will easily cover your fifth wheel hitch when not in use and give you complete access to it…

view full answer...

Answer 2

Demco recommends using a 3/16" or thinner Lube Plate #16721 with their Autoslide 5th Wheel Trailer Hitch #DM8550035. With the addition of the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes #DM76FR you have I recommend using a dry lube…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

What's The Recommended Lube Plate For Demco UMS 31k 5th Wheel Hitch?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching