Mount this 5th-wheel hitch in your industry-standard rails for a secure towing connection. The funnel-shaped head helps guide the king pin into place for simple coupling, while the two-piece design makes installation and handling more manageable.
Heavy one-piece fifth-wheel hitches can turn removing the hitch into the part of towing you start putting off, especially when your truck bed is needed between trips. This Blue Ox hitch uses a two-piece design that separates into a 50 lbs base and a 51 lbs head, with a 101 lbs total weight, so installation, removal, and handling are easier to manage in sections. The hitch becomes something you can take in and out as part of normal trip prep, not a fixture you have to work around.
When you're backing under your trailer, the moment that matters is knowing the kingpin is where it needs to be before the trip starts. The funnel-shaped hitch head helps guide the kingpin into place to reduce the risk of improper hookups, and 360-degree kingpin contact provides a stable and secure connection while towing. Coupling feels more deliberate, and your pre-trip routine ends with a connection you can confirm before heading out.
Fifth-wheel towing rarely happens on perfectly flat pavement, and stiff hitch behavior can make driveways, campsites, and uneven roads feel harsher from the cab. The dual articulating head allows front-to-back and side-to-side movement, letting your truck and trailer move together more naturally for smoother towing. That movement helps the whole setup stay easier to manage when the road surface or campsite approach isn't perfectly level.
Before towing, the important question isn't just how much the hitch is rated for, but whether the setup matches the way your trailer and rails are arranged. This hitch mounts to industry standard rails with 20" wide x 22" front-to-back tab spacing and is rated for 24,000 lbs gross towing weight with a 6,000 lbs vertical load limit. If your trailer uses a Rota-Flex pin box, the Blue Ox BXR9005 Rota-Flex Lockout Kit (sold separately) is required, giving you the key setup details before installation starts.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer. Let's take a quick look at this Blue Ox Fifth Wheel Hitch for your industry-standard rails. So this is a fifth wheel hitch that's designed to mount directly to your industry-standard rails, so if your truck already has those, installation's gonna be straightforward. This includes pins and clips to clip this into your rails in the bed of your truck. So, this hitch is gonna be ideal for RV owners towing medium to large fifth wheel trailers who want a high-capacity, reliable setup that's gonna be easier to handle and hook up. This is especially well-suited for those who like smoother towing and added safety features without dealing with something that's overly heavy or hard to remove.
Now, in regards to the measurements, the industry-standard rail tab spacing, I went ahead and measured those before our time together. So looking at the width, from tab to tab, it's gonna be right at 20 inches. And then from front to back or back to front, it's gonna be right at 22 inches. But in terms of compatibility, or capability, rather, this is built for serious towing. This has a 24,000-pound gross towing capacity, and this is gonna be able to handle up to 6,000 pounds of vertical load, which is gonna make it a solid choice, again, for those larger fifth wheel trailers.
One of the standout features is this funnel-shaped hitch head. It's going to help guide the kingpin into place. So, when you're hooking up, it's gonna reduce the chances of a bad connection or the trailer slipping. And that's something that can be a big concern with fifth wheel setups. And this is also going to allow for true 360-degree contact with the kingpin, so you're getting a secure, fully-seated connection.
Now, going back out to my wide view here, I do have a kingpin here, and I just wanna show you how easy this is gonna be to hook up. So, you have your release handle here. It has a safety pin and clip, so I'm just gonna go ahead, remove that. It is tethered so you don't lose it. And then, you just pull this handle out and then turn it.
And then, this is open now. And then, you can just guide that kingpin in with that funnel. And once it's in, (handle clanging) you'll just turn that handle and then it'll retract back. And then, of course, you'll replace the safety pin and clip. But as you can see, your kingpin's gonna be secure, and it's gonna hold really well there. And so there's really not gonna be any guesswork with getting this secured. And then when you're ready to uncouple or disconnect, it's gonna be just that simple. (coupler clattering) Now, as you notice here, you do get a lube plate with this, and I'm just gonna go ahead and close this back up. The head itself is dual articulating, so it's gonna move front to back and side to side. And of course, as you know, that flexibility is going to help when you're hooking up on uneven ground. And it's also going to make for a more smoother ride while you're towing. You're also going to get some height adjustability as well. This is going to give you a height adjustment from 17 to 19 inches, so you're gonna be able to better match your trailer height and keep everything level while towing. You can't see it, but on the side here, you do have a pin that's going to allow you to raise or lower the head here. And then once you get that height position that you're looking for, you'll just slide that pin in and secure it in place with the clip. Another nice benefit is this is relatively easy to handle compared to other hitches in this class. It's a two-piece design with the base and head separating. And as you can see there, one of my coworkers there is demonstrating that. So the total weight of this unit is gonna be about 101 pounds, roughly 50 pounds for each piece. So, all that to say, it's gonna make it much more manageable to remove or install by yourself. Now, one thing to keep in mind is if your trailer has a Rota-Flex Pin Box, you are going to need a Lockout Kit, and namely the one that you see there on your screen and that's the Rota-Flex Lockout Kit. And if you are in need of that, I have included our part number for that. Let's take that part number, pop it in the search field of our website. That will take you to that kit. And you can add that to your order, and that's gonna help make everything compatible with this. So, you are going to get the pins in the clips, as I mentioned, and you see here at the front of this unit to tab this into your rails. You're also going to get the lube plate and everything that you see here. If you are also in need of those rails, we do have some options here at etrailer. If you are looking for help with installation in general, on this product page, we have a link underneath the Photo section that will take you to our installer locator. Click that link and answer the questions that it has for you, and that locator will find an installer in your area that etrailer has partnered with to do the install for you. I think it's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Ratings & Reviews
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.