Determining Which Trailer Fender Size is Needed

Question

Question:

How do I measure for my trailer so I order the correct one

asked by: John M

0

Expert Reply:

Trailer fenders are classified by the diameter of the trailer wheels they're compatible with. For instance, the # F008583 fender you referenced works with 13 inch diameter wheels. If you're unsure of the diameter of your wheels, the last two digits of your tires size will indicate the diameter of the wheel. For example, if your tire size is 185/80-13, 13 represents the diameter of the wheel. Choosing a fender appropriate for the wheel diameter is the most important factor.

I've linked you to our selection of trailer fenders. At the top of the page, you can choose the wheel diameter, then you can use the filters on the left margin to choose the desired color, style, mounting method, etc.

If you're trying to match an existing fender, each product description of the fenders lists the length, width and height of the fender, which should make matching up with your existing fender a bit easier.

expert reply by: Mike L

0

2000 S.

3/4/2024

I am urgently needing fenders for my 2000 Pace with 205/75D15 tires. I cannot locate the brand I need with external fixated fender.

Reply

Mike L.

3/5/2024

@2000S We have no way of knowing which exact fenders your trailer was originally equipped with, as there's no existing index for the component parts of a particular Y/M/M trailer. I can however link you to the fenders we offer that are compatible with 15 inch wheels. Use the filters on the left side of the page to help narrow down your choices. We hope that helps!

Helpful Links

dept-pg-trailer_fenders-pt-15_inch_wheels.aspx

Reply

Answer 1

I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram…

view full answer...

Answer 2

You will want the Tandem Axle Teardrop Trailer Fenders #HP44VR for your trailer. These fenders are 66" long, 9" wide and designed for 14" and 15" wheels. These will give you the necessary clearance with having the tires 60"…

view full answer...

Answer 3

What I recommend to keep someone from stealing your parked trailer is a wheel lock such as #RA-25 or a model that also covers the lug nuts such as #WI490. Usually the mere presence of a lock will cause a would-be thief to move on to another target.…

view full answer...

Answer 4

The length of a fender is measured from the longest point, at the very bottom of each end across. Then the height is measured from the tallest point, right in the center. For example, the CE Smith Single Axle Trailer Fender #CE17720 is 22-1/2"…

view full answer...

Answer 5

Hey Randy. We offer wide variety of U-bolts, but unfortunately we do not offer anything quite that large. Our biggest u-bolt is Item #11-70 which is 9-5/8" long and has an inner width of 5". The bolt diameter is 3/4" so the center to…

view full answer...

Answer 6

The attached instructions for the Dutton-Lainson StrongArm Electric Winch, part #DL25200, explain how the wires should be run on your vehicle when installing. You will run the positive wire from the harness under your truck, avoiding any exhaust or…

view full answer...

Answer 7

The type of battery you are looking for to use with the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 is just going to be a 12 volt battery rated for a minimum of 40 amps, and this is going to be a standard vehicle battery. There are so…

view full answer...

Answer 8

I spoke with the manufacturer and they recommend using 160 ft-lb for the torque spec on a 3/4 inch U-bolt #11-70.

view full answer...

Answer 9

I spoke to my contact at Dexter Axle, they told me the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit #DX54FR is made of steel. They also said that there is not an aluminum alternative.

view full answer...

Answer 10

To replace the fender on your 2022 Arising Ind. cargo trailer I recommend the following: - CE Smith Single Axle Trailer Fender #CE17100ATB To install this on your trailer you'll need mounting brackets light part #CE26098G-2 as well as mounting…

view full answer...

Answer 11

The best way to get interior lights in your trailer is to have a dedicated 12 volt battery, and battery box like #329-HM318BKS mounted to the trailer. This gives you the power needed while you're not hooked to your truck. For lights I recommend…

view full answer...

Answer 12

In regards to a 5.70-8 tire, the 5.70 represents the width of the tire which is 5.7" wide and the 8 represents the diameter of the wheel the tire is designed to fit which is 8" diameter. If you are needing a replacement, the Kenda K353 Bias…

view full answer...

Determining Which Trailer Fender Size is Needed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching