Installation Instructions for the Hopkins Trailer Hitch Level # HM09715

Question

Question:

I have lost my instructions. Are you able to send them to me.

asked by: Cj

1

Helpful Expert Reply:

I went out into our warehouse and pulled a Hopkins Trailer Hitch Level # HM09715 and took pictures of the installation instructions. I attached them to this page for you to check out.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Hello Nathaniel, thanks for reaching out. So the etrailer jacks are going to be a great choice from a durability and affordability standpoint. The jacks offer all of the features you would want like a work light, sealed switches and a manual crank…

view full answer...

Answer 2

Hello, and thanks for getting in touch. The etrailer Electric Trailer Jacks #e55ZV and #e23ZV will hold up just fine in cold weather. The housing is designed to be water/weather resistant. It even has a manual backup option if you were to lose power…

view full answer...

Answer 3

I have a different option for you, but there are no scissor jacks rated for lifting (leveling) a trailer like your Forest River Flagstaff Super Lite 29KSWS. Instead you will need to use the tongue jack to level the trailer front to back, and leveling…

view full answer...

Answer 4

Hey Peter, I am sure people have used scissor jacks like the part #e56VV as jacks for spare changing here and there but I cannot safely recommend you do so. They are designed to lift and if the tire is flat the jack would be at an angle and would…

view full answer...

Answer 5

You will want to use a cobalt or titanium drill bit when drilling the 5/32-in pilot hole for the #HM09715 hitch level. These type bits are used for harder metal and will do a better job than just a steel or high-speed steel bit as they will dull…

view full answer...

Answer 6

There are pros and cons to both Husky and Bulldog electric trailer jacks. My favorite Husky jack is the Husky Brute Electric Trailer Jack part #HT87247 and my favorite Bulldog jack is the Bulldog Powered-Drive Trailer Jack part #BD500187. The reason…

view full answer...

Answer 7

Thanks for sending in a picture of your thumb latch coupler and trailer jack. Based on seeing that we know the Hopkins Trailer Hitch Level with Cover part #HM09715 would fit and work great as we had chance to install this on the exact same coupler as…

view full answer...

Answer 8

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 9

Hello Rocky, thanks for reaching out. If your new leaf springs do not have as much of an arch as the old springs they are definitely not going to help your situation if your tires are already rubbing on the fenders. What we would usually do here is…

view full answer...

Answer 10

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Installation Instructions for the Hopkins Trailer Hitch Level # HM09715

Product Page this Question was Asked From

Continue Researching