Difference Between Yakima Standard and HD Tracks

Question

Question:

What’s different with 54”HD tracks for rack ?

asked by: Zhen

0

Expert Reply:

Thanks for reaching out, Zhen!

The Yakima 54" Tracks for Roof Racks # Y26RR has smaller tracks designed for use with a roof rack mounting system, while the Yakima 54" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y64MR are a bit more robust and can handle roof racks along with the OverHaul HD and OutPost HD truck bed ladder racks.

If you aren't sure how you'll use this yet then I recommend going with the HD option since it gives you more opportunities to use it. Let me know what you plan on using the tracks for and I'd be more than happy to let you know what else you'll need!

expert reply by: Jon G

0

Zhen

8/28/2024

I try to looking for 2023 Honda ridgeline bed rail ,that I try to install cross bar for hard shell rooftop tent about 600lb capacity.

Reply

Jon G.

8/28/2024

@Zhen In that case I recommend the following: - 54" HD Tracks # Y64MR - Landing Pad 26 # Y75ZR (you'll need 2 of these) - SkyLine Towers # Y53TR - JetStream Crossbars 60" # Y00426 OR 70" # Y00427 depending on truck bed rail width Each crossbar will have a 110 lb weight rating but that's the dynamic (in transit) rating. These will be rated high enough for your 600 lb capacity roof top tent when you are set up for camping.

Reply

Answer 1

The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…

view full answer...

Answer 2

The T-slot channel dimensions for the Yakima HD Crossbars #Y01158 are 11mm (7/16") wide on top, 8mm(5/16") deep, and 22mm(14/16") wide at it's bottom. I attached a picture of the HD crossbar's diagram as well as a video with…

view full answer...

Answer 3

The Yakima PlusNuts replacement part #Y8880039 is the optional hardware kit for Yakima roof rack tracks #Y01126 (42 inch) and #Y01127(54 inch) and are made out of steel. The roof-rack tracks are an anodized aluminum so you wouldn't have any…

view full answer...

Answer 4

The Yakima JetStream crossbars have a T-slot that is 1 inch wide and 1/2 inch tall so any t-bolt used would have to fit within those measurements. The 4-bolt set of M10 x 1.5 x 25 bolts #Y8880184 will work since the head is 3/4 inches square but I…

view full answer...

Answer 5

Not all UWS tool boxes use the same key actually. We sell replacement keys for the UWS toolboxes and they range pretty widely so you the key you'd get with the part #UWS01061 would most likely not come with the same key you mentioned.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Rick, I went through the install instructions of the Roadmaster Direct Connect base plate kit part #RM97RR and you actually trim out a whole in the shutters and reinstall them. They are not totally removed. Do you have a tow bar already?

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 11

Hey Scott, yes the hardware that comes with the Replacement Track Adapter Installation Hardware for Yakima OverHaul HD #Y69KR would fit into the tonneau cover tracks that you have on your 2020 Ford F-350 with the Embark tonneau. This kit will not…

view full answer...

Answer 12

Hello Leslie, I looked up your previous orders and see that you ordered the #RRVA180B 71" Rhino Rack Vortex Crossbars back in 2023. I took a stroll out to the warehouse and was able to confirm that the mounting hardware #Y42XR for the Yakima…

view full answer...

Difference Between Yakima Standard and HD Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching