Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid

Question

Question:

Im looking for your advice to attach an older version Thule Hullavator 897XT 2 sets to a 2024 Honda CRV Hybrid with roof rails no crossbars. I have done well with 48 inch Yakima round bars and Q Towers that clamped to the rails of a narrower 2009 Ford Escape. I own 58 inch and 76 inch yakima bars as well. I will need a way to extend the Hullavator far enough away from the sides of the Honda. Are there mounting towers for the Honda that would allow the use of the round bars? What would you recommend? Thank you

asked by: Jim F

0

Expert Reply:

There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following:

-SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR

-RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536

-SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR

If you have Yakima Same Key System locks you can transfer them over or you can add new locks using # Y07204.

expert reply by: Robin H

0

Jim

3/27/2024

Thank you for your reply. Do you carry the parts to attach the Hullavator 897xt to the bars including the bar mount assembly and necessary hardware? Thank you, Jim

Reply

Robin H.

3/28/2024

@Jim the following parts should be everything you need to mount the old 897XT to your round bars: -Replacement Underbar Bracket for Thule Hullavator # TH8535860 -Replacement Pivot Pin for Thule Hullavator # 853-5869 -Replacement M6 x 22 Carriage Bolt # 915-0622-54 -Replacement M6 Washer # 951061254 -Replacement Round Nut for Thule Carriers # 853-5439

Reply

Jim

3/28/2024

@RobinH What about the Bar Mount Assembly, do you have those as well (part that the Hullavator attaches to). Thank you, Jim

Reply

Robin H.

3/28/2024

@Jim yes we do have the Replacement Bar Mount Assembly for Thule Hullavator # TH753352403.

Reply

Answer 1

The Thule Motion XT 22 cubic foot cargo box, part #TH629906 requires 55 inches of front clearance. To determine if it'll fit on your CX-5, you'll need to measure from the center of the front crossbar rearward until you reach the seam where…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hi Adam, The Rhino Rack Vortex Roof Rack #RR65NP is a full roof rack kit and will be all you need to get a roof rack on your 2013 Toyota Prius C. It includes the crossbars, towers (some people call them feet), and the door jamb clamps. The only…

view full answer...

Answer 5

Jeff, first of all, I'm relieved to hear you weren't injured in this accident. As far as replacements go, we do have a replacement crossbar with the Rhino-Rack Vortex Aero Crossbar #RRVA137B but the towers and fit kit are only sold as a…

view full answer...

Answer 6

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 7

Hey Alex, this is a great question but Thule is accurate. The height above the crossbars on the Thule Motion 3 XL part #TH37PN is 12 inches. I am not sure why we had the wrong info listed there but I sent an update to have it fixed. How much…

view full answer...

Answer 8

So there are really only a pair of differences at base between the Thule Motion XT and Thule Force XT rooftop cargo boxes. One is the aesthetic, with the Force XT having a textured, flat black finish, while the Motion XT has a high-gloss black…

view full answer...

Answer 9

Hey Denny, Yakima cargo boxes like the part #Y63QD, #Y73QD, #Y93QD, and #Y43QD don't have stated weight capacities which means as long as you stay under the weight capacity of the vehicle's roof rack you'll be fine. Worth mentioning is…

view full answer...

Answer 10

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 11

Hey Gary, the lower fascia under the bumper of your 2025 Honda CR-V Hybrid Sport does get trimmed to install the Draw Tite hitch part #DT79MR but the bumper itself does not get trimmed or modified. The picture I attached shows what gets trimmed.

view full answer...

Answer 12

The best hitch for a 2024 Honda CR-V is the Curt item #C13397. This hitch is custom fit and bolts to your Honda with included hardware. This hitch fits all models of the 2024 CR-V including the hybrid. The Curt item #C13397 is a class III hitch with…

view full answer...

Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching