Wiring Diagram For SeeLevel RV Holding Tank Monitor # SE94VR

Question

Question:

I need a wiring diagram for a seelevel SE94VR system. I bought from trailer and it didn’t come with instructions or wiring diagram

asked by: John C

0

Expert Reply:

Hi John,

I'm sorry you weren't given a set of instructions to go along with your SeeLevel RV Holding Tank Monitor # SE94VR. I've attached a diagram below showing that the White wire will run to your water pump, Red to your 12v power source, Black to your sensor strips as the ground, and Blue to your sensor strips as the positive. To make your connections you can use some 18 gauge wire.

If you have any other questions please let me know and I'd be happy to help.

expert reply by: Kevin C

0

Answer 1

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

view full answer...

Answer 2

Hey Mark, the MaxxFan communication cable part #MA59PR is an RJ45 data cable.

view full answer...

Answer 3

For the MB Sturgis Sturgi-Stay T-Fitting w/ Hose for POL Valve - 2 Model 250 Quick Disconnect Ports #103538-MBS you will put this between the tank and the motorhome's in line regulator. Then you will need a single stage regulator like #CAM59013…

view full answer...

Answer 4

The propane fitting adapter part #204129-MBS that you referenced has the propane flow through from the 1/4 male NPT side to the Type 1 fitting side.

view full answer...

Answer 5

There is not an easy way to verify the tongue weight of a fifth wheel trailer if you do not already have the trailer. The best way to find the tongue weight of your fifth wheel trailer is to use a commercial scale like those at truck stops or at…

view full answer...

Answer 6

I attached a wiring diagram for the Redarc BCDC part #RED96FR for you to check out to show you where everything needs to wire but I also attached a link to the install instructions for you to check out as well.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Even when stored in the somewhat controlled environment of a garage, tires are still subject to dry rot and flat spotting. Even if the tire tread has plenty of depth left and you can't see any cracking with the naked eye, the generally accepted…

view full answer...

Wiring Diagram For SeeLevel RV Holding Tank Monitor # SE94VR

Product Page this Question was Asked From

Continue Researching