Replacement Hitch Pin for Thule Pro 934 Bike Rack

Question

Question:

Looking for a replacement hitch bolt for a Thule Pro 934 bike rack. Threaded metric M12.

asked by: Steven H

0

Expert Reply:

To replace the threaded hitch pin bolt for your Thule Pro 934 bike rack you need part # TH62RE.

We also have the replacement hardware kit # 7520990001 if you need more than just the hitch bolt, or part # THSTL2 if you want the locking hitch pin kit.

expert reply by: Jon G

0

Answer 1

Thank you for the picture. It looks like you have the Thule Hitching Post Pro, part #TH934XTR. We have a replacement bolt for that, but the bolt you reference, part #915087031, is not it. The replacement bolt you need comes in the Replacement…

view full answer...

Answer 2

Definitely! The Thule Hitching Post Pro #TH934XTR uses a lot of the basic Thule equipment including the following: Stay-Put Cradle - #853-7887 Anti-Sway Attachment - #852-2903-001 2" Hitch Adapter - #853-7489 Round Tube End Cap - #853-2181…

view full answer...

Answer 3

Yes, the anti-rattle hitch pin included in the Replacement Hardware Bag #7520990001 would be a compatible fit for your Thule Hitching Post Pro (934PRO). This doesn't include a lock though so any one with a socket or wrench set could potentially…

view full answer...

Answer 4

If your Thule Vertex 4 Bike 9029 does not have the Anti-Sway Attachment #852-2903-001 you can add this along with the Strap #852-3006-001. The Anti-Sway attaches to the Cradle #852-3005-002 to help reduce the amount the bikes are able to move…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 8

Hey John, thanks for reaching out! Replacement bike rack parts can be a bit confusing to find, but I really like delving into this stuff and I'm pretty confident you're looking for the bolt for the older Thule Vertex bike rack, which looks…

view full answer...

Answer 9

Hey Lucas, It looks like both the Redarc #RED72CR and #RED68CR are going to include the same wire harness #RED99FR, but the #RED72CR is also going to include some mounting panels to make mounting the control knob into your dash easier so I'd go…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Hey Bill, what you need for the brake controller is the Redarc Liberty part #RED72CR which comes with the correct install harness for your 2021 Toyota Tacoma. This is the controller that just puts a small knob on your dash like you are looking for.…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Replacement Hitch Pin for Thule Pro 934 Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching