Replacement For Hardwired Carbon Monoxide Detector

Question

Question:

We have a costar 12RV-DB carbon monoxide hard wired with battery backup, what would be a replacement model that would be the same compatible item?

asked by: Mari

0

Expert Reply:

We do have an option to replace your hardwired 12RV-DB carbon monoxide detector, and it is available in either Black or White:

- Black: RV Propane Gas and Carbon Monoxide Detector # RS54FR

- White: RV Propane Gas and Carbon Monoxide Detector # RS34FR

Just like your unit, this is a 12-volt hardwired detector so you can just swap it out.

expert reply by: Kyle S

0

Answer 1

If you need a propane gas and carbon monoxide detector you can use the RVSafe #RS34FR unit. It is also available in black #RS54FR adn a three-wire system #RS94FR.

view full answer...

Answer 2

The Atwood RV carbon monoxide and propane gas detector you mentioned is no longer made so we are unable to get it at this time but we do have the similar white part #RS34FR which would also work great.

view full answer...

Answer 3

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 4

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 5

I recommend the #RS34FR to replace your current LP gas detector. This is a simple 2 wire design making for easy installation.

view full answer...

Answer 6

We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas…

view full answer...

Answer 7

I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector #RS64FR in white, or #RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas…

view full answer...

Answer 8

Hi Brenda, The Atwood 31013 unfortunately has been discontinued so you'd need to go with a completely new LP gas detector. We have a couple of surface mount style detectors that come with trim rings that will cover the old unit's cutout hole…

view full answer...

Answer 9

We do have a couple of options to replace your Atwood 36636, and you can use either, with the only difference being the color: - RV Propane Gas and Carbon Monoxide Detector - Black #RS54FR or White #RS34FR Either will work perfectly as replacements…

view full answer...

Answer 10

Atwood is no longer in business so you'd have to switch over to a new brand in order to get what you need. We currently only carry the RV Propane Gas #RS44FR (white #RS64FR) which comes with two different trims (large: 7-1/4" long x…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Replacement For Hardwired Carbon Monoxide Detector

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching