Speed Charger and USB to USB-C Cable For A NOCO Genius Boost GB40 Jump Starter

Question

Question:

I have a NOCO Genius Boost+ GB40. I need the correct cable for charging and a NOCO Speed Charger.

asked by: James D

0

Expert Reply:

You will need the NOCO Speed Charger # NOC23RR to charge the NOCO Boost Plus Jump Starter # 329-GB40. You can use the USB-MicroUSB included with your NOCO or we have a Scosche SyncAble HD Micro USB Cable # 332-HDEZ4 which is 4' long you can use with the Speed Charger.

expert reply by: Bud M

0

Kev

1/1/2025

I’ve just bought the GB40 and it’s got the usb-c charge port not the micro usb. Is this the newest model? Thanks Kev

Reply

Answer 1

The NOCO Boost Plus Jump Starter part #329-GB40 has a built in safe guard to prevent overcharging. It is never recommended of course to leave anything on a charge indefinitely but will be fine if it is left on the charger overnight or for the weekend…

view full answer...

Answer 2

Great question! I went ahead and brought this to the attention of my tech at NOCO. He confirmed that as part of the safety measures of the NOCO Boost Plus #329-GB40, no current will be flowing to the clamps unless it is connected to that battery that…

view full answer...

Answer 3

If your NOCO Boost Plus Jump Starter - LED Work Light - USB Port - 12V - 1,000 Amp #329-GB40 is only blinking yellow and not giving a full charge after staying on overnight the unit is defective and will need to be replaced.

view full answer...

Answer 4

Yes the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM09160 can be installed with lag bolts. It's really up to the application and your best judgment on how best to install this kit and lag bolts would work just fine.

view full answer...

Answer 5

I'd recommend a set of the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM09160 for each of your ATVs. I'd run the straps on the wheels of each ATV closest to the front of the trailer if at all possible. The hardware…

view full answer...

Answer 6

It looks like each chock and strap from 2 of #EM09160 will need to be able to hold around 375 pounds to handle the weight of the 2014 Arctic Cat Wildcat X Limited and that is just static load and does not include the forces applied to the chocks and…

view full answer...

Answer 7

Typically for wood floors we recommend using backing plates like the part #e96RR with the E-tracks like part #E19148 that you mentioned. I attached an install video for an E-track that shows the backing plate being used as well.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Speed Charger and USB to USB-C Cable For A NOCO Genius Boost GB40 Jump Starter

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching