Availability of Hardware Kit for Firestone Ride Rite Kit F2250

Question

Question:

Is there a hardware kit for the F2250 kit?

asked by: Michael C

0

Expert Reply:

We have some replacement parts for the Firestone Ride Rite kit part # F2250. We have the following:

Replacement Bail Clamp # F3373
Replacement Bracket Clamp # F0530
Air Line Service Kit # F2012
Air Spring part # F6781
Lower Bracket # F5541
Upper Bracket # F5766
Hardware Kit part # FA21-760-2250

Since you said hardware kit most likely you are referring to the # FA21-760-2250 but I wanted to mention everything in case you needed additional components.

expert reply by: Jameson C

0

Answer 1

The Firestone Ride-Rite Air Spring product that fits your 2013 Chevrolet Silverado 1500 is their kit #F2430. For this kit we offer the passenger side upper bracket #F5528, driver side upper bracket #F2135825487, the lower bracket #F5781 and the axle…

view full answer...

Answer 2

The Firestone SD Upper Bracket for Ride-Rite Air Helper Springs #F5572 referenced in your question includes 1 standard-duty upper bracket. The installation hardware is not included with this replacement part. If you are needing the hardware, you will…

view full answer...

Answer 3

So what you are really looking for is the best value for air bags on your 2008 GMC Sierra 2500, and that's completely understandable. While air bags aren't going to necessarily be cheap, what we can get you is exactly what you're looking…

view full answer...

Answer 4

I sure can Bob and thanks for the information! Since you have a Lippert 3,500 lbs axle you'll be able to use the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles item #AKHD-545-35-EZ-K, you were looking at. These have a 5 on 4-1/2 lug nut…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Lance! The only mount available from Stromberg Carlson for the #SC83GR is the Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers #CC-255. If you want to mount it on your 4" bumper I recommend using the 24x40 etrailer Cargo…

view full answer...

Answer 8

I'm not sure which brake adjustment tool you have but on our PT #W80630 there are two sides that can be used. The end with the 90 degree bend is designed for adjusting electric brakes on drop axles like yours, which will allow you to access that…

view full answer...

Answer 9

Since you have a Dometic Duotherm 630035.321 we do have great options for AC unit replacements that will plug right into the current wiring you have like with the Furrion Chill HE kit part #FR42PV which we have found to be the quietest and coldest…

view full answer...

Answer 10

Hey Jared, If your axle has a brake flange like I have pictured below then you would be able to mount a 3,500lb brake assembly #AKEBRK-35 (manual-adjust) or #AKEBRK-35-SA (self-adjust). You'll also need to replace your idler hubs with drums so…

view full answer...

Availability of Hardware Kit for Firestone Ride Rite Kit F2250

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching