Can this Slipper Spring Be Used for Both Underslung and Overslung Axles?
Updated 01/11/2022 | Published 01/10/2022
Question:
Is the locator pin in the center of spring the same diameter on both the top and bottom of the spring? Meaning can this spring set be used on either underslung or overslung axles? Thank you.
asked by: Alan H
0
Expert Reply:
Yes, the bolt in the center of the Universal Group 6-Leaf Slipper Spring w/ Radius End for 12,000-lb Trailer Axles - 30-1/2" Long item # SP-269275 has the same diameter on both sides of the leaf pack. This leaf spring can be used for both underslung or overslung axles.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
6-Leaf Slipper Spring w/ Radius End for 12,000-lb Trailer Axles - 30-1/2" Long
- Trailer Leaf Springs
- Slipper Springs
- 1 Inch Eye
- Rubber Bushing
- 12000 lbs
- 3 Inch Wide
- 6 Leaf
- 30-1/2 Inch Long
- Standard Grade
- Universal Group
more information >
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Availability of 3 inch Diameter Trailer Axle with 80 inch Between Spring Seat Centers
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Installing 7-Way And Brake Controller On A 2024 Toyota Grand Highlander With Factory 4-Flat
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Q&A: What Are The Torque Specs for 5/8" Lug Studs and Flange Nuts
- Q&A: Trailer Brakes Lock Up When Connected to Truck
- Article: Slipper Spring Trailer Suspension System Review
- Article: Stability Control for Heavy Duty Vehicles