Bulldog Gooseneck Coupler Dimensions

Question

Question:

please attach the dimension of this product.

asked by: Akshay

0

Expert Reply:

The retracted height of this product # BD0287600300 is 29-1/2", the ball hole is 2-5/16", and has a range of adjustment of 8".

expert reply by: Bryce D

0

Answer 1

Since you need a 4 inch diameter pipe the best option we have is the part #BD0287610300 as it has a 4 inch outer diameter whereas the #BD0287690300 that you referenced would be too wide at 4-1/2 inches. Or the part #CG would work too as it is 4 inch…

view full answer...

Answer 2

We have a few different adjustable gooseneck couplers available. We offer a Bulldog Gooseneck Coupler with a 20K capacity which adjusts from 29 to 35 inches, part #BD0287600300. The coupler is for a 2-5/16 inch ball and features a 4 inch inside…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hello Clark, I'm glad you reached out. The Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter #RM-1139-193 only works with dual-wheel trucks. We do have a rear anti-sway bar that will work for your 2021 Ford F-350 Super Duty with single-wheel…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hello Shane, Great question, and I am going to need you pin box number to ensure we are getting you the right part number. If you are unsure of your pin box number, please feel free to send me the information off of the sticker on your current Pin…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

Hey Craig, it sounds like you are asking if the Andersen Ultimate Connection part #AN67VR can be used in the bed of your 2025 GMC Sierra short bed that has the OEM rail kit. If so, yes it can but you will need to use the pop in ball adapter part…

view full answer...

Answer 10

Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Bulldog Gooseneck Coupler Dimensions

Product Page this Question was Asked From

Continue Researching