Can Drop Down/Swing Down Stabilizer Jacks Be Used On a Dump Trailer

Question

Question:

do you have anything heavier for my 16foot dump trailer. what are these raited for ? thanks

asked by: David D

0

Expert Reply:

I do have an option for you but drop down/swing down stabilizer jacks like part # AR94FR aren't really designed for dump trailers, in order to properly support the weight of a dump trailer you will need to use drop leg jacks on the corners like the Fulton Drop-Leg Stabilizer Jack with Mounting Channel part # FSJ1-SJ2 which is what I recommend.

expert reply by: Conner L

0

Answer 1

Hey Steven, I recommend going with the Lock N Roll Articulating Trailer Hitch for 2" Receivers #336VS501 because it is a fully-articulating connection that uses pins instead of a round hitch ball connection so you can be completely confident…

view full answer...

Answer 2

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…

view full answer...

Answer 3

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

view full answer...

Answer 4

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

view full answer...

Answer 5

Hey Greg, thanks for reaching out to us! Hopefully I can help you get all of this figured out so you can seamlessly keep your refrigerator battery charged up. It sounds like you're needing the Redarc In-Vehicle BCDC Trailer Battery Charger…

view full answer...

Answer 6

Hello Josh, thanks for reaching out. The Self-Contained Hydraulic Jack #e33VV cannot be powered by the 7-way. It needs its own full size deep cycle RV/marine battery. You will also need battery cables for connecting to the HPU.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Can Drop Down/Swing Down Stabilizer Jacks Be Used On a Dump Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching