Can the Malone Balloon Tire Beach Wheels fit a Hobie Frame Kayak Cart

Question

Question:

Will these tires fit the Hobie frame??

asked by: Steve U

0

Expert Reply:

We do not carry the Hobie Frame kayak carts so I wouldn't be able to tell you if the Replacement Balloon Tire Beach Wheels # MPG516 will fit or not. The # MPG516 is designed to work on the Malone Clipper Deluxe All-Terrain Kayak and Canoe Cart and the Malone Xpress Scupper-Style All-Terrain Kayak Cart, but will also fit other model carts if the wheel fits the axles. The wheel is designed for a 2.75" long axle with a 20.5 mm diameter (0.80"). If your Hobie Frame meets those specifications then it will work.

expert reply by: Scott S

0

Answer 1

We checked with Malone and they told us that the pilot diameter for the Replacement Balloon Beach Wheels #MPG516 that you referenced is 20.5 mm.

view full answer...

Answer 2

I have an excellent recommendation for you. Take a look at the Rhino-Rack J-style kayak carrier #S512. This carrier has a weight capacity of 99 pounds! It fits round, aero/elliptical and most factory crossbars. Be sure to also check the roof/roof…

view full answer...

Answer 3

The Balloon Beach Wheels for Malone Clipper/Xpress Kayak Cart part #MPG516 for the Malone Clipper part #MPG502 and Xpress Kayak Carts part #MPG504 will fit other model carts if the wheel fits the axles. The wheel is designed for a 2.75" long…

view full answer...

Answer 4

I spoke with my rep at Malone and was told that the pilot diameter for the Replacement Balloon Beach Wheels item #MPG516 that you referenced is 20.5 mm. Depending on which model of cart you have will determine if these wheels will fit. I have…

view full answer...

Answer 5

The 12" Balloon Tire Beach Wheels for Malone Clipper or Xpress Kayak Cart #MPG516 do not include any shims or parts for mounting to the Cart. You will need to reuse or source the appropriate shims if you have lost them.

view full answer...

Answer 6

The Malone Traverse Kayak Cart with Flat-Free Tires #MAL29AR is an excellent product to transport your kayak along solid ground like gravel or grass. You can definitely swap out the tires to the Balloon Tire Beach Wheels #MPG516 for that softer…

view full answer...

Answer 7

I spoke with LockRack and they said the bolt for the Universal Crossbar Adapter for Lockrack Watersport Carrier #LR53FR measures 1-3/8" long and takes a 3/16 or 5 mm hex key.

view full answer...

Answer 8

The difference is the mounting hardware that comes with the Lockrack Adjustable Stand-Up Paddle Board Carrier - 1 SUP. The Channel Mount #LR47FR comes with mounting hardware that slides into T-Slot channels in your roof rack crossbars, while the…

view full answer...

Answer 9

I'm a little surprised that the clamps on the #LR54FR won't tighten down on your 2023 Nissan Rogue crossbars but it is not unheard of with watersport carriers. The easiest way to fix the issue is to add in a thin piece of rubber. This will…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 12

Hey Adelaina! It can definitely be overwhelming but don't worry, I'm here to help. We can start with the hitch, wiring, and brake controller since they are the most important part. I recommend the following: -etrailer Trailer Hitch Receiver…

view full answer...

Can the Malone Balloon Tire Beach Wheels fit a Hobie Frame Kayak Cart

Product Page this Question was Asked From

Continue Researching