Trailer Axle Solution for Small Welding Trailer with Narrow Wheelbase
Updated 04/15/2021 | Published 04/13/2021
Products Featured in This Question
Question:
i need a short axle 1200 ibs capacity 5 lug 4,5 pattern spring hanger set at 24 inches and face to face hubs 32 to 36 making a small welding trailer only tired on moving welder in and out of truck bed do you make any thing close
asked by: Robert E
Helpful Expert Reply:
That's shorter than what we have standard axles for but we can help with a Timbren axle less system like part # ASR1200S02 and then with 5 lug hubs like # AKIHUB-545-2-G-EZ-2K but if you need a standard axle you'd probably need to find a trailer shop near you who can order you in custom axles.
Product Page this Question was Asked From
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: Hub with Bearings that Fits BT8 2k Axle Trailer Spindle TRU94FR
- Q&A: How To Determine Which Spare Hub Assembly Is Correct For Spartan Sport Boat Trailer
- Q&A: Which Trailer Tire Size is best for a Jet Ski Trailer that has 4.80-12 Tires
- Q&A: 12 Inch Trailer Tire w/ High Load and Speed Rating
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Accurately Measure Trailer Leaf Springs