Recommended 16" Dually Trailer Wheels with 8-Bolt Pattern

Question

Question:

I am looking for aluminum dually wheels that will fit a 10000 pound Dexter axle 16 in eight lug

asked by: Larry B

0

Expert Reply:

The Dexstar Dual Wheel part # AM20783 for 4.75" pilot or part # AM20790 for 4.88" pilot are the only two available dually trailer wheel options we offer with 16" diameter and 8-bolt pattern. These wheels are both constructed of steel. I am not aware of any aluminum dual trailer wheels so steel will be your only option.

expert reply by: Conner L

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hello Jeremy. We do have the Dexstar Dual Wheel with Offset #AM20783 which is a 16" wheel with a 5.5" offset and the 8 on 6-1/2" bolt pattern just like the 8C2Z-1015-G wheel. The #AM20783 wheel has a 4.75" pilot hole. I did not…

view full answer...

Answer 6

Hi Thien, From what I saw a 2017 Ford E450 chassis does use the same 16x6 wheel with an 8 on 6-1/2" bolt pattern, so the correct fit is the Steel Dual Wheel with Offset - 16" x 6" Rim - 8 on 6.5 - 4.75" Pilot - Silver #AM83NR.…

view full answer...

Answer 7

Hi Jake; the PullRite SuperGlide 5th Wheel Hitch #PUL83RR is what you need for your 2025 Chevy Silverado 2500. This will drop right into the pucks from your OEM prep package. You will also need a capture plate like the #PUL46RR. The right one depends…

view full answer...

Answer 8

Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…

view full answer...

Answer 9

We don't carry a bumper mounted spare tire carrier capable of the weight of a Class C Motorhome spare tire, however, we do have a hitch mounted option. The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening #RM-195225 is an…

view full answer...

Answer 10

We have a couple of options for spare wheels that may work on your Coachmen Leprechaun. You will want to measure the pilot hole of one of the rims currently on your motorhome to determine which one will work for you. 4.75 Pilot Hole - Dexstar Dual…

view full answer...

Answer 11

Hey Calen, Appreciate the business and we do have the right wheel studs for your Dexter 9-123 hub. They are drive in/press in studs as well, and 5/8" like you mentioned. The correct part for you is the following: - Replacement Dexter Axle…

view full answer...

Recommended 16" Dually Trailer Wheels with 8-Bolt Pattern

Product Page this Question was Asked From

Continue Researching