Trailer Hitch Recommendation for a 2010 Ford F-150 Towing a 6,500 lb Boat
Question:
What is the best hitch for towing a 6500 lb 25 foot power boat on an Easy Load trailer?
asked by: Al B
Expert Reply:
There are a few things to consider to determine if you can safely tow your 6,500 lb boat with your 2010 Ford F-150. The first thing to determine is the towing capacity of your truck. This information should be listed in your owners manual. If the towing capacity of your truck is lower than 6,500 lbs, then I would not recommend towing your boat at all with your truck. Towing capacities range from 5,000 lbs to 9,000 lbs on the Ford F-150, so it is important that you check the capacity for your specific truck.
If you determine that your truck has a towing capacity higher than the weight you are planning on towing, then you will want to select a properly rated hitch. For your set up, I would recommend installing the Curt Class IV Trailer Hitch, # C14002. This hitch has a 2 inch receiver and that a gross trailer weight capacity of 10,000 lbs and a tongue weight capacity of 1,000 lbs. Keep in mind that this trailer hitch does not increase the towing capacity of your truck. Your towing capacity will be limited to the lowest rated item in your set up.
I have attached the installation instructions for this trailer hitch for you to check out.
Another system that you may be interested in is a weight distribution system like the Reese Strait-Line Weight Distribution System with Sway Control, # RP66074. A weight distribution system adds spring bars to the hitch system that apply leverage between the tow vehicle and the trailer. This will eliminate the sag at your rear axle and transfers the weight sitting at the rear of your truck to all axles.
The Reese Strait-Line system is one of the best weight distribution systems we offer and includes dual cam sway control for a comfortable ride. I have attached an article on weight distribution for you to check out.

Products Referenced in This Question
Reese Strait-Line Weight Distribution w/ Sway Control - No Shank - 12 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Reese Pro Round Bar Weight Distribution w/ Sway Control - 11,500 lbs GTW, 1,150 lbs TW
- Video: Ultimate Overview of the Reese Pro Round Bar Weight Distribution w/ Sway Control
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Whats the Difference Between Towing Capacity and Weight Distribution Towing Capacity?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Availability of Hitch for 2013 Ford F-150 With Factory Installed Tow Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Trailer Hitch Receiver for 2010 Ford F-150
- Q&A: Recommended Heavy Duty Trailer Hitch for a 2010 Ford F-150 With a Factory Hitch
- Q&A: How Will Available Curt Hitches for 2010 Ford F150 Install in Relation to the Rear Bumper
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Which Hitches are Made in the USA
- Article: Determining Trailer Tongue Weight
- Article: Best Bike Racks for Electric Bikes
- Article: How to Install a Trailer Hitch
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size