How to Manually Release Locked Up Disc Brakes
Published 08/23/2019 >
Question:
How do you manually release disc brakes? The disc brakes on my rear dual axle trailer are frozen in place. I cant get the boat and trailer 2A repair shop if I cant release the brakes. Please help.
asked by: Paul M
Expert Reply:
Your best bet is to start by opening up the line connection to release some fluid pressure. If one of your lines collapsed it potentially caused it to hold pressure to that axle alone. It's not too likely but worth ruling out. If that's the case, just opening up the bleeders at the caliper will let it retract.
If your calipers are actually frozen (rusted or corroded) with the pistons in place the next best solution is to take the disc brake assembly apart. I have included a disc brake installation video to help you understand the removal process. With extremely corroded calipers it's likely the job will require a large hammer to get them off.
Otherwise, the only other solution is to load it up onto a lowboy/flatbed to be taken to repair shop.

Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LED Display
- Single Trailer Only
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: grease lubricants sealants adhesives
- Q&A: Can The DeeMaxx # DE86VR Replace Tie Down Engineering 46034 Brake Caliper
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Video: DeeMaxx Union Fitting for Hydraulic Brake Hose Spec Review
- Video: Replacement Bleed Port for Kodiak Disc Brake Calipers Feature Review
- Video: Kodiak Disc Brake Caliper Review
- Q&A: Replacement Parts Available for Kodiak Disc Brake Kit K2R35D
- Q&A: Recommended Replacement Caliper For A Kodiak 225
- Q&A: What Disc Brakes Do You Recommend For 2003 521 Ranger With A Tandem Axle
- Q&A: Can Kodiak Stainless Steel Disc Brake Calipers be Used to Replace Calipers on EZ Loader Boat Trailer
- Shop: Kodiak Disc Brake Caliper - Dacromet - 7,000 lbs to 8,000 lbs
- Shop: Kodiak Disc Brake Caliper - KodaGuard - 3,500 lbs to 6,000 lbs
- Shop: Replacement Bleed Port for Kodiak Disc Brake Calipers - Brass
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Shop: DeeMaxx Union Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares
- Shop: Reverse Lockout Solenoid for Dexter and Tie Down Hydraulic Brake Actuators
- Q&A: What Tool is Needed to Remove the Castle Nut on a Trailer Axle