What Might Cause Tire Inner Sidewall Rubbing on Trailer Frame
Updated 03/20/2019 | Published 03/19/2019 >
Question:
I have a tandem wheel 25inch Toy Hauler. I just purchased the EZ Flex Equalizer and Shackle Straps. While putting it all together I noticed that the inside of each tire on the rear axle is worn on the inside. the springs have been mounted on the top of the axles. Also the equalizer on the passenger side of the trailer sticks up in the front part, where the rear of the front axle spring attaches, and down in the rear by about 1.5 -2.0inch by about the same amount. Thanks for any help here
asked by: Steve L
Expert Reply:
Sounds like your trailer axles are a bit too short if the inner sidewall is rubbing on the frame of the trailer. Did you recently change to a wider tire? That could be the cause too. Your equalizer being angled shouldn't cause the issue you described but it might be an indicator that parts are worn out or the hangers are at the wrong distance between each other.

Product Page this Question was Asked From
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Solution for Tire Sidewall Rubbing Against Trailer Frame
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Search Results: marine grease
- Video: Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Q&A: Best Option to Upgrade from Bias Tire Size 7.50-16 to Radial Trailer Tire
- Q&A: How to Fix Top of Trailer Tires Rubbing Fender
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Compatibility Of Dexter Heavy-Duty Suspension Kit Item # K71-449-00 With Current Setup
- Q&A: Will Upgrading Trailer Suspension Stop Tires from Blowing Out
- Q&A: Can 3-1/8 Inch Heavy Duty Shackle Straps be Used in Dexter Heavy-Duty Trailer Suspension Kit
- Q&A: Replacement Dexter Heavy Duty Suspension Kit For 7-3/4" Wide Equalizer
- Search Results: 3500 leaf springs
- Search Results: leaf spring
- Search Results: suspension upgrade
- Search Results: shackle straps
- Search Results: trailer leaf spring
- Search Results: heavy duty suspension kit
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Buyers Products Shovel Holder for Trucks: The Breakdown
- Video: Setting up the Dexter Bronze Bushings on your 2019 CrossRoads Redwood Fifth Wheel
- Shop: Mud Flaps