Replacement Parts for Curt TruTrack Weight Distribution System # C17500
Updated 05/28/2025 | Published 02/14/2019
Products Featured in This Question
Question:
Last summer I purchased a Curt 17500 distribution hitch from a man at his moving sale. After checking the number to make sure it would fit we made a deal. I dont have a travel trailer as of now we are still saving for one. I was ?Happy? as could be. Fast forward to yesterday when I decided to open the box and get the instructions out, many many parts missing. I was scamed bad. Are parts available for this model.
asked by: Douglas M
Helpful Expert Reply:
I have some good news to offset some of that anger from recently being scammed. We do indeed have all of the replacement parts available for the Curt TruTrack Weight Distribution System # C17500 and I will list them out below.
Replacement L-Pins and Clips # C17513
Replacement Spring Bar Lift Tool # C17512
Replacement Trunnion Spring Bar (quantity of 1) # C17536
Replacement Frame Brackets # C17508
Replacement Hardware Kit # C17550
Replacement Head # C17507
I have also attached the complete installation manual for the Curt TruTrack below that you can take a look at in case that wasn't in the box either.
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: anderson kantleak
- Search Results: hitch extension
- Search Results: rv interior lights
- Search Results: 12v rocker switch
- Shop: GE Appliances RV Refrigerator with Top Freezer - 9.8 Cu. Ft. - 12V - Stainless - Right Opening Door
- Search Results: happijac remote
- Shop: Trailer Wiring
- Search Results: range exhaust vent
- Search Results: table leg
- Shop: 12V RV LED Reading Light - 6-1/8" Tall - Satin Nickel
- Shop: Replacement Hardware Kit for Curt TruTrack Weight Distribution System w/ Sway Control - 5K to 10K
- Shop: Replacement Handle for B&B RV Hot Water By-Pass Diverter - Red
- Q&A: Replacement For 1510000236 Slide-Out Controller
- Shop: Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
- Shop: Curt Replacement OEM USCAR Trailer Connector - Dual Connection - 7-Way RV Style and 4-Way Flat
- Shop: Aluminum Sendel Series T09 Black Machined Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2
- Q&A: Recommended Replacement For An Atwood GCH6A-10 E S RV Water Heater
- Video: Curt Weight Distribution C17550 Review
- Q&A: Replacement Gearbox for Landing Gear With Motor 125340
- Q&A: Replacement Motor for Lippert Model 1-065-041012-01 Landing Gear
- Q&A: Replacement Slide Out Motor for Power Gear Slide Out 523900
- Q&A: Replacement Hardware Kit for Curt TruTrack Weight Distribution System
- Q&A: Recommended Replacement Cotter Pin and Clip For Curt TruTrack 17500 Weight Distribution
- Shop: Suspension Enhancement
- Shop: Trailer Hitch
- Video: Curt Weight Distribution C17508 Review
- Video: Review of Equal-i-zer Pins and Thumb Clips For Weight Distribution Spring Bars - EQ95-01-9415
- Video: The Low-Down on the TowSmart Folding 4-Way Lug Wrench
- Video: TowSmart Folding 4-Way Lug Wrench Spec Review
- Video: All You Need to Know About the Lug Wrench with SAE and Metric Sockets
Ken
4/15/2025
Hey Chris, By chance, do you know if I am able to get parts for the Weight Distribution Head assembly? I don't mean extra Pins or bars, I mean the actual internal parts of the Curt Weight Distribution Head Assembly. The one with the spring loaded Detent Balls. I bought a used trailer and it came with the hitch but, it was never greased and the detent housing on one side of the hitch was cracked as a result so, I need the actual disk that houses the two Steel Balls that rest in the detent depression of the disk itself. I also need the housing piece that the bolt and internal spring assembly goes into because the top of that housing is also wallared out and unusable. Any guidence would be greatly appreciated! Sincerely, Ken