Front Hitch Recommendation for 2018 Ford F-150

Question

Question:

Which is the best front hitch for my 2018 Ford F-150? I see a couple options.

asked by: Ray

0

Expert Reply:

For your 2018 Ford F-150 I recommend the Curt Front Hitch # C31083 because it's make in the USA, is easy to install, and has plenty of capacity at 9,000 lb line pull.

In case you were looking for a plow too I attached a link to this page that has all of the hitch mounted plows we offer that are designed to work with this hitch too.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I have included some pictures of Curt Front Mount Trailer Hitch Skid Shield #C31007 for you. The overall height of the skid plate is 4-1/4 inches, overall width is 4-7/8 inches. The overall length of the unit end to end is approximately 8-3/8 inches.…

view full answer...

Answer 2

For your 2020 Ford F-150 XLT the best front mount hitch is the Curt #C31083 because it's going to sit just a tad higher than the Draw-Tite alternative for better ground clearance. The 2" receiver for the Curt hitch will actually protrude…

view full answer...

Answer 3

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Draw Tite hitch part #65067 is a fit for your 2022 Ford F-150 as long as it doesn't have the auto deploying air dam. It would not reduce ground clearance either since it fits the air dam gets cut around it when installed.

view full answer...

Answer 6

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 and the Curt Front Mount Trailer Hitch Receiver #C31083 are both confirmed to fit your 2020 Ford F-150. They are very similar in design and mount to the same locations on the frame, however the…

view full answer...

Answer 7

There are few differences between the Draw-Tite Front Mount Trailer Hitch Receiver #65067 and Curt Front Mount Trailer Hitch Receiver #C31083 that fit your 2020 Ford F-150, with the main difference being ground clearance. The Curt hitch does have…

view full answer...

Answer 8

Hey Keith, I don't have that exact number but if you check out the picture I attached you can see that the hitch opening is flush with the tow hooks.

view full answer...

Answer 9

Hey Dan, thanks for getting in touch. And good questions. For starters, there is no way to actually increase the vertical load rating of the Curt #C31083 front hitch. 500 lbs is the limit, and I cannot recommend using that to move a 750 lb tongue…

view full answer...

Answer 10

Hey Eric, we have the Hellwig rear sway bar part #HE77FR that is a fit for your 2019 Ford F-150 and would do a great job tightening up the handling of your truck once the camper is on. You can also fine tune how stiff you want the bar to feel as…

view full answer...

Answer 11

You can install a 7 way connector on your 2019 Ford F-150 by using the Curt T-Connector #C56413, which will plug into the factory supplied 4 way connector plug on your vehicle and give you a fully functioning 7 way connector. If you've got a…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Front Hitch Recommendation for 2018 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching