Trailer for Twin Troller X10 Recommendation

Question

Question:

What is the maximum width of the trailer?

asked by: Lewis G

0

Expert Reply:

The CE Smith Boat Trailer for Boats and PWCs up to 12' Long # CE48810 that you referenced can be used to transport your Twin Troller X10. You'll have to mount the bunks close together with them laying as flat as possible. I looked up how people configure trailers to be used with the Twin Troller and that is how you would use a trailer like this. The bunks of this trailer easily allow this to happen.

expert reply by: Jameson C

0

Answer 1

For the Malone LowMax trailer the correct replacement dust cap is the part #F001518.

view full answer...

Answer 2

The correct replacement hub for the CE Smith Multi Sport Trailers like part #CE48810 is the CE Smith Trailer Hub Assembly part #CE13210 which does have 1 inch diameter spindle where the bearings ride.

view full answer...

Answer 3

Yes, you can change the wheels on the CE Smith Multi Sport Boat and Kayak Trailer #CE48810 from 8" to 12". This would give you a trailer like the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870. To complete the conversion you will…

view full answer...

Answer 4

If the tires on your CE Smith Multi Sport Boat and Kayak Trailer #CE48810 have some play then that would definitely be contributing to what you're hearing. If the lugs are tight then this means that your spindle nut needs to be tightened down as…

view full answer...

Answer 5

The least expensive option we can offer you to transport the Sun Dolphin Water Tender Dinghy is with the CE Smith Multi Sport Boat Trailer part #CE48810. This boat trailer will be perfect for you as it comes with everything you need to hit the…

view full answer...

Answer 6

I recommend using something like the CE Smith Multi Sport Trailer #CE48810. This one is a bunk style which I like using with heavier boats like your 77lb kayak. This trailer is for a 12 foot boat and it comes with load range B tires so it's rated…

view full answer...

Answer 7

The bunk boards on the CE Smith Boat Trailer #CE48810 are actually adjustable so that it can accommodate a wide variety of boat styles. If you check out the picture I attached you can see that a similar boat (might even be the same boat) fits great…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Trailer for Twin Troller X10 Recommendation

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching