Can Motorcycle Wheel Chock Be Installed in Trailer Floor with Mesh Floor
Updated 04/24/2018 | Published 04/23/2018
Question:
Hello, I am in the process of purchasing a small utility trailer such as the one in the link provided below. I am looking to transport a dirt bike, and will need a wheel chock for the front tire. I was wondering which ones you would recommend because I see a lot of them mount to a wood floor, and the trailer I am getting has a metal mesh floor. Thank you for your help.
asked by: Jim
Expert Reply:
You'd have to get somewhat creative to install a motorcycle wheel chock like the part # TWSPWC3BT to a mesh floor trailer. Ideally I'd recommend you mount the chock to a piece of plywood and then mount the wood to the mesh floor or remove it each time you use it.
Product Page this Question was Asked From
Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
- Wheel Chocks
- Wheel Chock
- Motorcycle
- Steel
- Single Chock
- Chrome
- Tow-Rax
more information >
Continue Researching
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
- Shop: Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
- Q&A: Recommended Motorcycle Wheel Chock For a Trailer With E-Track Ran Length Wise
- Q&A: Recommended Replacement Entry Door Latch for Fastec 23348 CR6
- Q&A: Extra Blue Wire Near 7-Way Trailer Connector on 2003 Chevy Silverado 2500 HD
- Q&A: Replacement Trailer Hub with 5-on-4-1/2-Inch Bolt Pattern
- Q&A: Will Dexter 9K - 10K Hub and Drum Fit Lippert 10K Axle
- Q&A: Spare Tire Recommendation for a 2018 Aluma 548 Trailer
- Q&A: Propane Manifold to Run Propane Line to Stove in Camper