Troubleshooting Wiring For A 1980s Keystone Four wheel Camper
Updated 03/27/2018 | Published 03/26/2018 >
Question:
Wiring diagram, everything works except the taillight. I think this is Reflect o Lite Model 1400.
asked by: Manny
Expert Reply:
I do not have any wiring diagrams specific to your trailer or the Reflect O Lite Model 1400.
Start by checking to see if your ground is firmly attached to clean metal surface. Next, check connection of wires to make sure securely connected. After that, make sure connector free of corrosion or debris. Next, check fuses and make sure required fuses are not blown or missing. If still not working, you will need to use a circuit tester, Item # PTW2993, and make sure the wires are properly working and are connected function to function.
If still having issues, contact us and we will look at other troubleshooting options.
I have attached some article on wiring to assist you.

Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: How to Hook Light Bar Up to Work with High Beams on Vehicle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Q&A: Recommended Tow Wiring Harness for a 2025 Kia Telluride
- Article: Troubleshooting Brake Controller Installations