What are the Trailer Towing Capacities for a 2014 Ford Fusion
Updated 06/29/2017 | Published 06/28/2017 >
Question:
Can you recommend some trailers not carriers for this hitch?
asked by: Kevin M
Expert Reply:
Before deciding on a trailer to tow with your 2014 Ford Fusion, knowing the towing limitations of your vehicle will be an important factor.
In the owner's manual for the 2014 Fusion, it lists the maximum trailer weight of all the powertrain options for this vehicle. The manual states that your vehicle may tow a Class I trailer with the max trailer weight of 1,000 lbs for 1.5L, 1.6L, and 2.5L powertrains and 2,000 lbs for the 2.0L powertrain models. Therefore, depending on your engine size you will be looking at being able to tow between a max of 1,000-2,000 lbs.
The tongue weight rating of for this vehicle will be 10 to 15 percent of the total loaded weight of the trailer. So, if you have a trailer weight limit of 1,000 pounds, then the tongue weight allowance will be between 100 to 150 lbs.
Therefore, you will need to look for a Class I trailer that has a weight limit up to 1,000 lbs or 2,000 lbs depending on the powertrain of your Fusion.
The Curt Class I Hitch, # C12091, that you referenced is confirmed to fit the 2014 Ford Fusion. However, even though the hitch has a trailer weight rating of 3,500 lbs and a tongue weight rating of 350 lbs, you CANNOT tow a trailer with these weight ratings with the 2014 Ford Fusion. You always have to use the lowest rated component of your towing setup. In this case, the trailer and tongue weight limit on the Fusion is the deciding factor.
I have included an installation video of the Curt hitch being installed on a 2014 Ford Fusion for you to review. I also attached a few of help articles on choosing the correct hitch, installation tips, and trailer towing for you.

Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Video: DIY Install: Draw-Tite Sportframe Trailer Hitch Receiver on your 2020 Ford Fusion
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Q&A: Ground Clearance After Installing a Hitch on a 2014 Ford Fusion
- Q&A: Difference Between Class I and Class II Hitches that Fit 2020 Ford Fusion
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Performance Chips and Modules
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Can the Lower Body Fascia be Reinstalled with Curt Trailer Hitch # C12091 on 2013 Ford Fusion
- Shop: Trailer Wiring
- Q&A: Ball Mount for 2016 Ford Fusion
- Shop: Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs
- Shop: Exhaust
- Shop: Vehicle Lights
- Shop: Vehicle Air Mattress
- Shop: Lamp Guards
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Trailer Wiring Diagrams
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Search Results: trailer hitch ball mount
- Shop: Brake Controller
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado