What Parameters Does the Edge Insight CTS Monitor

Question

Question:

will the insight monitor injector balance rates on a LB7 and whats the diff between the CTS and the CS

asked by: Rick

0

Expert Reply:

The Edge Insight CTS, # EP84130, the data parameters you can monitor include:

Battery Voltage
Intake Air Temperature (IAT)
Engine Oil Pressure (EOP)
Engine Coolant Temperature (ECT)
Engine Oil Temperature (EOT)
Transmission Fluid Temperature (TFT)
Miles Per Hour (MPH)
Miles Per Gallon (MPG)
Revolutions Per Minute (RPM)
1/4-mile and 0 - 60 times

When used with performance products, Insight can also read advanced data like exhaust gas temperature (EGT), boost, engine load and diesel particulate filter (DPF) regeneration status. All data can be viewed in either numeric or analog gauge style.

The CTS, # EP84130, works the same as # EP84030, except that the CTS has a touch screen interface.

expert reply by: Michael H

0

Answer 1

In order to select engine oil pressure (EOP) and or engine oil temperature (EOT) as the parameters that the Edge Insight CS2 Comprehensive Gauge Display part #EP84030 displays on the home screen (if applicable) you will need to follow the six steps I…

view full answer...

Answer 2

The Edge Insight CS2 #EP84030 that you referenced can be programmed to display the engine oil pressure or engine oil temperature on your Ford F-350 by going through a few steps. Looking at the gauge layout screen, press the ENTER button and you will…

view full answer...

Answer 3

I'm not sure of the processes you've gone through with your Edge CS2 #EP85350, but this most commonly occurs when you haven't chosen a custom tune for your vehicle- which would be the only way to set a tire size. You'll want to choose…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Dan, yes the rear tie downs that come with the Torklift Tie Down set part #TL34VV do bolt to the trailer hitch at the rear of the truck. I attached a picture that shows our installer bolting it in that area.

view full answer...

Answer 9

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Do you have a crew cab or a regular cab? Torklift is really particular with their fits but with that last bit of info I should be able to see what solution would work.

view full answer...

Answer 12

Hey Randy! The TorkLift Tie Downs item #TL63PR, you were looking at, do include a set for both the front and the rear. These fit the 2024 Ford F-350's with both the 6-3/4' and 8' bed trucks with a factory hitch, Torklift SuperHitch Magnum…

view full answer...

What Parameters Does the Edge Insight CTS Monitor

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching