How Many Watts Does 12 Volt Heater PTW5009 Draw and is it Ceramic

Question

Question:

How many watts and is it ceramic ?

asked by: Pat

1

Helpful Expert Reply:

Heater # PTW5009 draws 13 amps at 12 volts which equals out to about 156 watts. I did a little research and from what I could find it is not ceramic.

expert reply by: Michael H

1

Answer 1

The Pop & Lock Custom Tailgate Handle with Lock and Key Alike Lock Cylinder #PAL5400 is designed to work with your 2011 Toyota Tacoma regardless if it has the backup camera or not. Since yours does have a camera, you will need to pop out a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Norm, thanks for hanging out! Along with one fitting different brands of trucks the Trail and Elite are also different. The Tow Pro Trail # RED94UR is designed to be used primarily off-road, specifically engineered and tested for off-road adventures.…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 7

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 8

For DC electricity, I can help you out. You can run a 10 gauge wire like #10-1-1 sold by the foot from a 6-way or 7-way connection from the 12V to a deep cycle 12V battery and then run the battery to a ground on the trailer. You can use a solenoid…

view full answer...

Answer 9

Depending on the seal around your hard shell's opening and whether or not you have side windows you would have no problem using a 300 watt heater like the Rampage Radiant Backseat Heater item #RA3501 to keep you warm. A 300 watt heater is…

view full answer...

Answer 10

I can absolutely help you with this trailer. First, I recommend using the 7-Way Molded Trailer Plug with Junction Box #HS381-9000 along with ring terminals #44-5310A. This will easily allow you to convert your 4-way wiring and also add your trailer…

view full answer...

Answer 11

The two Curt weight distribution (WD) hitches you referenced, parts #C17002 and #C17052, are both round bar type WD systems that are intended for trailer tongue weights between 800 and 1000-lbs. Both include the same component parts (and both do NOT…

view full answer...

Answer 12

Some Shelby winch models used a handle that secured to the winch with an Allen key. If this is the type you have then it is possible that the set screw or the post on the winch the handle attaches to is stripped or worn to the point that the handle…

view full answer...

How Many Watts Does 12 Volt Heater PTW5009 Draw and is it Ceramic

Product Page this Question was Asked From

Continue Researching