Recommended Hitch for Maximizing Towing Capacity on a 2006 Jeep Grand Cherokee
Question:
Hi there, I have a 2006 Jeep Grand Cherokee 3.7L V6 and am looking at installing a better tow package so I can haul a larger trailer. I bought my vehicle used and it has a small hitch and electrical already hooked up. So, in order to increase my towing capabilities, what is the best method without compromising the performance and longevity of my Jeep? With your recommendation, what is the max weight of the future trailer that I would be able to tow? Thanks,
asked by: Lacey
Expert Reply:
First thing to know is that you cannot increase your towing capacity by upgrading your hitch. Instead you can maximize your towing capacity. You will have to abide by the lowest rated component in your setup, which may end up being your vehicle in this case.
In my research for your vehicle I came across the weight capacities per drivetrain, I've attached a snapshot of this from page 312. This should also be listed on the placard on the inside of your driver's door. The Draw-Tite 2 inch hitch # 75338 will fit your 2006 Jeep Grand Cherokee as long as it's not an SRT-8 model, but it will not increase your capacities to the 750lbs tongue and 5,000lbs towing. Since you have the 3.7L, it would just maximize your capacity by allowing full range of the 350lbs tongue and 3,500lbs towing. The following pages after 312 talk about loading your trailer and vehicle and should also be consulted before towing. The max trailer weight should not exceed 3,500lbs for your vehicle, the Draw-Tite hitch # 75338 is confirmed to allow this 3,500lbs max trailer weight.
We have found that if you plan on towing to your maximum capacities, it is a good idea to get an additional transmission cooler like the Derale # D13503 to help keep your engine from overheating under the circumstances, this will help preserve the performance and longevity of your Jeep. I have linked a video installation of this on a similar vehicle for you to check out.
I have linked the above mentioned products to this page for your purchasing convenience.

Products Referenced in This Question
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- No Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Converting a 4-Way Trailer Connector to a 7-Way on a 2014 Toyota FJ Cruiser
- Q&A: Choosing the Correct Hitch for a Jeep Grand Cherokee 2006
- Article: Best Bike Racks for Electric Bikes
- Q&A: Hitch That Fits a 2007 Jeep Grand Cherokee Laredo
- Article: Hyk Outdoors Teardrop Campers: Happy Camping Without the Hassle
- Q&A: Why Would Draw Tite Hitch 76104 Have Higher Tongue Weight Capacity than Jeep Hitch
- Article: Trailer Lighting Requirements
- Q&A: Curt Trailer Hitch # C13392 And # 13432 TW and GTW Capacities
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Parts Needed to Add 7 Way Trailer Connector to 2020 Jeep Wrangler without Towing Package
- Q&A: Replacement Gearbox for Landing Gear With Motor 125340
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit