What is the Difference Between the Thule AeroBlade Edge and WingBar Roof Racks

Question

Question:

Im looking at the Thule aero roof rack for a 2014 BMW X3 with rails. There seems to be 2 options on your website that appear to be identical. One is the Edge and the other is WingBar. What is the difference? From the website, they appear identical.

asked by: Dean M

1

Helpful Expert Reply:

The discontinued Thule AeroBlade Edge uses Thule's AeroBlade Edge technology which mount flush to your 2014 BMW X3 factory side rails so do not extend farther than your side rails.

Thule WingBar Roof Rack with # TH711200 is an aftermarket style rack which sits along the top of each bar. Unlike the AeroBlade Edge, this roof rack extends past your vehicle's factory side rails. This rack is 47" long which gives more space to carry items on your roof. It also comes in black using # TH711220.

The foot pack you need is # TH710601 which mounts onto your roof and provide a sleek design. You will also need the roof rack fit kit # TH186007 which reinforce the weight distribution and stabilize your cargo by securing the foot on your roof.

I have attached photos comparing the Podium and Edge style racks for you to check out.

expert reply by: Sarah H

1

click to enlarge

Answer 1

There are a couple of things that set the Rhino Rack system using #RRVA150B-2, #RRRCH4, #RRRCP43-BK apart from the Inno system that uses parts #INXB138-2, #INXS350, #INTR154 you're looking at. I'll start out by saying that when it comes to…

view full answer...

Answer 2

When it comes to cutting, If you are planning to use the Thule Xsporter like the #TH500XT-XK4, Thule does not recommend cutting the crossbars of this system. Unfortunately, all models of Thule Xsporter include the 72-inch long crossbars. With that…

view full answer...

Answer 3

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 4

The Thule Hullavator Kayak Carrier #TH898 weighs 40lbs, requires crossbar space of 28-1/2", and the crossbars need to extend past the roof rack legs by at least 4" on each side. So in order to fit two on your Subaru Forester, you will need…

view full answer...

Answer 5

I spoke to my contact at Thule and she said to use the Thule Tepui Low-Pro 2 Rooftop Tent - 2 Person - 400 lbs - Gray #TH8001LP204 on your 1997 Suburban, you will need crossbars to mount onto your existing rails. If you have raised roof rails on your…

view full answer...

Answer 6

Crossbar spread is a key factor in determining the accessories and loads that the system can safely carry on a car. To properly measure, you will need to measure from the center of one bar to the center of the other. This is the correct way to…

view full answer...

Answer 7

The Thule WingBars, like part #TH711200 have a top opening of 1/2 inch and a 3/4 inch width at the bottom.

view full answer...

Answer 8

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

view full answer...

Answer 9

I checked with Thule and the correct size Thule WingBar Evo Crossbars for a 2016 Subaru Forester with factory raised side rails is 47", part #TH711200 which can be installed when used with the Evo Raised Rail Feet for Thule Crossbars part…

view full answer...

Answer 10

Thule's Wingbar Edge Roof Rack part numbers #TH63RE and #TH69SC that fits your 2017 Volkswagen Tiguan with raised side rails does fit models that have the glass roof. Thule recommends not opening your sunroof with the rack and accessories…

view full answer...

Answer 11

Hello Kara - Thanks so much for reaching out. Crossbars that are compatible with your 2014 Subaru Forester and 1993 Chevy S-10 Blazer 4-door depend on what kind of factory roof rack you have (if any). Once I find out what kind of factory rack you…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What is the Difference Between the Thule AeroBlade Edge and WingBar Roof Racks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching