Can Standard Shackle Bolts Replace Stepped Shackle Bolts
Updated 04/12/2016 | Published 04/08/2016
Products Featured in This Question
Question:
my shackle bolts are stepped, i want to replace them do i need to use stepped bolts or can i use the 9/16, 3inch bolt?
asked by: Warren C
0
Expert Reply:
The Step Wet Bolt # 34007-187-00 is a 9/16-inch diameter overall and 3-inches long. The threaded portion is a smaller 7/16-inch diameter (which is the "step").
You can use this part with the matching 7/16 nut # 192600 or you can use standard non-stepped 9/16-inch bolts like # 126B2 (which has a grease zerk fitting) or part # 166081 that does not.
expert reply by:
Adam R
0
Product Page this Question was Asked From
Step Wet Bolt for 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Suspension Bolts
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch Diameter
- 3-5/8 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Q&A: Recommended Torque Specs for 9/16 and 1/2 Inch Trailer Suspension Hardware
- Q&A: Looking to Add Roadmaster Comfort Ride and MORryde X-Factor Crossmember, are Wet Bolts Compatible?
- Q&A: Suspension Enhancement Options for 2023 Grand Design Momentum 25G
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Correct Roadmaster Comfort Ride Leaf Spring Suspension Kit For 2023 Keystone Bullet Premier 25RKPR
- Q&A: Could Equalizer Kit K71-449-00 Fit Trailer with Axle Spacing of 34 inches
- Q&A: What is Advantage of Never Fail Tandem Axle Suspension Upgrade Hardware Kit Over Other Options
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)