Recommended Wall Vent for Enclosed Trailer with Gas Water Heater

Published 02/19/2015

Products Featured in This Question

2-Piece Exterior Wall Vent for Enclosed Trailers - Polypropylene - 3" Diameter Hole - White

(421)

$20.04

Wood Screw - 8 x 3/4" Slotted Round Head

(6)

$4.77

Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive

(33)

$0.65

Question:

I have an enclosed trailer that is finished on the inside with cabinetry and a sink. I am going to put a gas tankless water heater under the sink and inside the cabinet. I was told that ventilation would be necessary. What would work well for side wall ventilation?

asked by: Cameron M

Expert Reply:

I recommend our Redline 2-Piece Polypropylene Trailer Vent # WHMAV2-WAVT2. This wall vent will work on a trailer wall up to 2 inches thick and can be installed in any convenient location on your enclosed trailer where you have or can make a 3-inch diameter hole. This wall vent is designed to provide a constant flow of air, and is louvered on one side so you can adjust it when installing for the best airflow and to help prevent water from getting in.

You can use a sealant for installation such as # 0160297. You'll also need to supply 9 installation screws per vent, such as either # 31071 for sheet metal or # 30587 for wood. I have included a video review of this wall vent for you to check out.

expert reply by: Chris O