How do Torklift # TLR3500 Rear Camper Tiedowns Attach to 2012 Toyota Tacoma  

Turnbuckles like theHappiJac Original #LC182898 are more or less universal so you'll be able to use them with the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLT2303.

If you're needing camper tie downs for your 2014 Toyota Tacoma then there are two different options based on whether your Tacoma is 2WD or 4WD: For 2WD models you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLT2308 and…

To mount a truck bed camper to a 2006 Toyota Tacoma you would need the following tie-downs: For 4WD Models without a board or step underneath the bed and a factory hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLT2303 TorkLift Custom…

Currently (July 2020) only the powder coated steel TorkLift Tie-Downs #TL78ZR and #TL23RR for your 2020 Ram 1500 are available. When you can go with aluminum I do recommend it though simply because aluminum doesn't need a special coating to…

Currently the only compatible option we carry for a 2004 Toyota Tacoma is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLT2306 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLR3500. Happijac unfortunately doesn't have…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…