Kat's Heaters Ether Start Fluid Injection System - 3.3L to 8.2L Engine - 18 oz - Pull Cable

2013 Honda Pilot - Kat's Heaters Ether Start Fluid Injection System - 3.3L to 8.2L Engine - 18 oz - Pull Cable

Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Manual design means you get to choose when fluid is dispensed, and no electricity is needed.

Features:

• Pull-cable fluid injection system gives you fast, reliable startups in cold weather by injecting ether into the intake manifold
  • 18-oz Fuel cylinder with ether not included
• Manual pull-cable activation - you choose when to deliver the ether
  • Knob mounts in your cab - no need to have another person spray fluid as you turn the key
  • No electricity or battery power needed
• No over-injection
  • Actuating valve meters out 5 - 6 cc of ether for each use to prevent engine overload
• Spray nozzle with built-in filter vaporizes the ether
  • Prevents manifold flashback
• Virtually maintenance-free - just change out fuel cylinder when empty
• Kit includes:
  • 7' Pull cable with knob and sleeve
  • 4' Nylon tubing
  • 1 Spray nozzle
  • Actuator valve assembly
  • Protective caps, plugs, and gaskets
  • Mounting plate with clamps and hardware
• Made in the USA

Specs:

• Application: gas and diesel vehicles
• Engine size: 3.3L - 8.2L
• 3-Year limited warranty

Ether Injection System

This ether fuel injection system offers a hassle-free way to get fast, reliable startups in cold weather. Once activated, a measured shot of ether is vaporized and sent into your intake manifold. This vapor serves as a catalyst for combustion, helping to ensure that your engine starts on the first try, even in cold temperatures. The system is entirely manual and requires no electrical power, making it ideal for tractors, logging equipment, and other vehicles and machinery that can't be parked close to an outlet. Once the system is installed, there's nothing else that you need to do to maintain the system other than change out the fuel canister, which will need to be done after approximately 200 startups. This system is designed to work with an 18-oz canister of ether fast flash fuel (not included).

Pull-Cable Operation

Just trigger this Ether Start fuel injection system by pulling the knob that installs in the cab of your vehicle as you crank the engine. The cable that the knob is attached to will tug on the lever of the actuating assembly. This releases the ether into a metering chamber that will discharge 5 - 6 cc of liquid ether out through the nozzle. The nozzle's built-in filter vaporizes the ether, which is then injected into the intake manifold as a vapor instead of a stream. For the most effective and smoothest start, install this system so that the nozzle orifice is perpendicular to the manifold length.

33180 Kat's Heaters Ether Start Fuel Injection System - 200 - 499 CID Engine - 18 oz - Pull Cable