Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. Towed car's tail lights will operate as a combined lighting system. 4-Pole wiring harness included.
Features:
Specs:
Notes:
"Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem."
A combined lighting system uses the same light bulb to signal both braking and turning. (In other words, the car signals a turn by flashing the brake light.)
A separate lighting system has the brake signal and the turn signal light up independently of each other. Typically the turn signal is amber.
To keep the separate lighting system on your car functioning properly while you're flat towing, add a wiring converter (118158 sold separately) and 2 additional diodes.
If your towed car's brake lights illuminate when you press the brake pedal with the engine off, you need to install a brake light relay (RM-88400 - sold separately) with this kit. Without a relay, your car's brake signal will override the turn signal sent by the RV when you are slowing down to make a turn, creating a potentially dangerous situation. Other drivers will see that you're slowing down, but not that you're making a turn. With a brake light relay, you can signal both and travel safely.
Average Customer Rating: 4.8 out of 5 stars (770 Customer Reviews)
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. Towed car's tail lights will operate as a combined lighting system. 4-Pole wiring harness included.
Simple to install kit that does exactly as listed. Very thorough instruction that were easy to follow.
It does what it says on the tin. Easily lit up my XJ so I could tow it. Only regret is that by making the connections at the rear, you don’t get the front market lights on the toad. I should have connected the running lights diode in the harness under the dash so all the marker lights come on at night.
I’m always extremely satisfied with Roadmaster products. I had just bought a new truck and planned on towing it so I needed everything to get it ready to tow. This review also applies to to the other items I purchased.
First of all Justin B,was awesome so very helpful and knowledgeable went over everything with me and then double checked what was needed before I placed the order for my 2022 maverick to be flat towed, order only took 3days to get to Fl.Kudos to Justin B all the guys putting together the order
and etrailer awesome job,will definitely use them again for any of my needs.
Works perfectly and straightforward instructions made it easy to install.
I thought I order the 7 to 6 pin wiring harness for my vehicle as I have the 7/6 cord I used when I pulled my pickup. I also ordered the 6 pin mounting bracket with the 6 pin adapter that wires into the harness. I received the kit which is a flat 4 pin harness.
etrailer is a great company for towing products. They have fast delivery and they have nice installation videos. This order I added 2 more diodes to wire my 2015 Subaru Forester to have separate wiring for break, running, and turn signal lights.
This system worked perfectly from experience. They help from trailers e trailer agents was crucial for guiding me through the process.
It is exactly as advertised, not yet installed but looks pretty self explanatory
THE EQUIPMENT IS FINE. THE INSTALLATION VIDEOS ARE SUPERB. MAKING PURCHASING THIS PRODUCT VERY WORTHWHILE.
I have order several things from etrailer. Their products are great. Due to nobody's fault but my own I ordered some wrong things. The return was so easy, no questions asked. I would recommend this company to anybody.
I’ve used several of these and they always work great.
etrailer videos are a great help!
My parts arrived intact and in a timely manner. I am very pleased with my purchase.
Items arrived right on schedule and in good order. I ordered three items in the last few weeks. Their CHAT agents were extremely helpful in answering all my questions about compatibility with my vehicle.
Great tow plate , easy to install
Fits and works just as it should.
Installation instructions were great, no issues or questions. I ran the wire thru the frame, and used split wire loom and tape to protect wiring when outside the tube frame.
Product is very well built and is hidden within the bumper/grille. Installation wasn't too difficult, reinstallation of front bumper requires 2 people.
Pleased with end results.
I used this on a 1988 Toyota Land Cruiser, so I could flat tow it behind an Motorhome. Easy to install!
Easy install
Straightforward install on my Jeep Gladiator and no issues.
This was my choice for my flat tow set up on a 2018 Jeep GC. I did this install myself. it was not difficult.
Frank
4/9/2023
One year in and the wiring set up has worked as planned. no issues.
The install was more challenging than the tow bar itself but we got it done. Be patient with the tail light diodes they are tricky to fit but not impossible. I ended up using some 3m double sided adhesive sticky’s to hold the diodes in place while i pushed the tail light assembly back into position.
Lori was spot on in making sure I got the correct base plate assembly and light package for my 2015 Jeep Wrangler Sport. Deliver was within the projected timeframe and installation when as per detailed instructions . Good job Team ETrailer, that is why I keep coming back
The stuff not here
Do you have a question about this Tow Bar Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kenneth
12/8/2023
Diodes were not the ones I needed even though the etrailer site said they were. I had to purchase the correct ones from the auto electric shop where I had the wiring done.