Customers compare CE68ZR to these similar products
Products Featured in this Video
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this LED RV interior light with switch. This interior surface mounted white light can be installed on the surface of your ceiling or under your cabinets with no cut-outs required. As you can see, I have this connected to power already with the light turned on and I think a pretty good idea of just how bright this is,… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thanks for the picture! Yes, the Fan-Tastic Replacement Fan Motor Assembly Kit item #FVK8017-00 is the correct part for your Create-a-Breeze model 8000 vent. I confirmed this information with Fan-Tastic vent it is the best replacement.
view full answer...Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part #FVK8017-00 is the correct replacement fan/motor for your Fan-Tastic Vent Create-A-Breeze Model 8000.
view full answer...For your 28' enclosed trailer I recommend the Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - Black #FR23PV. If the ceiling of the trailer isn't too high and you can reach the air distribution box and…
view full answer...I spoke with the manufacturer, Command Electronics, about the 12V RV LED Puck Light #CE68ZR and found that it has a warm white - 3,500 kelvin rating.
view full answer...The Jensen Mechless RV Stereo #JWM20 has an internal antenna and a microphone on the front of the face plate so you would not need to supply either.
view full answer...Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the #A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the…
view full answer...A light drag on the drums from the brake magnets is normal, but if there's enough movement in the hub/drum that you can wiggle it that would indicate it's not quite tight enough. The nut is normally ran down until there is no side to…
view full answer...The number on the lens is not a part number. It is a rating for the lens/light. Based on that number it looks like the best match we have is #A31RB which is rated SAE AP2 86. The A in the number just means that it has a built-in reflector.
view full answer...There are actually a series of screws on the Jensen RV Stereo #JWM70A that keeps the face plate in place. In order to remove it you need to first remove the screws. Attached is a photo from the back side of the stereo where you can see some of the…
view full answer...The same answer would apply. The brake assembly #23-106-09 is designed to fit a Hayes/AL-KO or Dexter axle with either the 4-bolt or 5-bolt mounting flange. These are 12 x 2 inch brakes. To measure the drum you will measure the inside diameter. It…
view full answer...The value 8k etrailer brake assembly set part #AKEBRK-8 and the premium Dexter 8k set part #23-434-435 both offer the same stopping power. The Dexter brand is widely considered to be the best brand for trailer braking components and they do work…
view full answer...We have the brake assemblies you are looking for. The only 6k rated 12 by 2 inch assemblies we offer that have the same unique 4 bolt mounting patter are the #23-106-09 for the right hand side and part #23-105-09 for the left hand side. This is for…
view full answer...