2024 Ford F-450 Cab and Chassis Wheel Liners

I prefer the Furrion AC units over the Advent Air ones as they tend to blow colder air. For a single unit I'd go with the 15k BTU part #FR58PR which is for non-ducted applications like your enclosed trailer.

For your 2023 Thor Magnitude built on a Ford F-600 chassis the correct SumoSprings kit you'd want is the part #SS54VR for the rear and part #SSF-111-54 for the front.

The best solution we have for replacing the Dometic Brisk RV AC unit you have now is going to be the Advent Air part #ACDOM135 which was designed for easy replacement of Dometic units so it will install as easily as possible and allow you to continue…

The LaSalle Bristol RV Bathtub Drain w/ Stopper #34465PR227PS will work with the 2" diameter drain hole in your RV tub. But is does not work with the PVC Drain Connector #37295305. The #37295305 has a 1-3/4" connection and is designed for…

I would be happy to make those recommendations for you. To add a front sway bar to your 22,000 lbs 2019 Fleetwood Bounder you will want the Roadmaster Front Anti-Sway Bar item #RM-1139-148. This anti sway bar comes with all parts necessary to…

The floor mats I recommend for your motorhome built on a 2019 Ford E-450 motorhome are the WeatherTech All-Weather Front Floor Mats because they are constructed out of a highly durable thermoplastic designed to withstand the gauntlet of dirt, water,…

The B&W Tow & Stow Adjustable 3-Ball Mount #BWTS20049B has a 2-inch ball rated for 7500-lbs. You are right that standard individual 2-inch hitch balls can carry much higher ratings, such as Curt 2-inch ball #A-90 which is rated for 10K. All…

I recommend replacing units with the Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor - 13,500 Btu - White #ACM135C. Or if you want a heat strip go with the Advent Air RV Air Conditioner w/ Air Distribution Box, Start…

For 4-pole trailer wiring for your 2007 Ford E450 van without the factory tow package you can use Curt custom-fit passive harness #C56020 or the Hopkins custom harness #HM11140495 which has a powered converter. Both are shown on the linked page. The…

Vehicle tail light wiring has changed quite a bit over the past few years. There are basically 2 wire systems and 3 wire systems. A 2 wire system has combined brake lights and turn signals. A 3 wire system has separate turn signals and brake lights.…

You will need to start with a 4-way (if you do not have one). For that you would want the #HM11140495. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller…