Hey Ted, thanks for reaching out! I saw you picked up the Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Silver Mod Wheel #KE34WV - this is a solid choice for a spare tire and will work great in a pinch. Something to keep in mind…
I typically recommend using the etrailer E-Track Backing Plate w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 1 #e89RR on each end of your E-Track sections #E19148 and one in the middle for added support. With one backing plate on…
Since you have wooden floors in your trailer the hardware I would recommend for installing e-track like the part #EM19147 would be the Erickson Hardware kit part #SL49FR which is basically wood screws.
E-track like the part #e62VR will easily handle being driven over. It will not crush the track. Since it's a wood floor application I would recommend the Snap Loc Etrack Wood Screws part #SL49FR. I would use a screw in every screw hole.
The crossbar kit I'd recommend will depend on how often you'll use them, and whether or not you'll leave them in place on the roof for long periods of time when they're not being used. If you won't use them frequently and…
The Evo Raised Rail Feet #TH710401 and the (discontinued) Rapid Crossroad Feet TH450R are both almost identical when it comes to crossbar height increase. They sit in the 1-1/2" - 1-3/4" range from the height of the raised rails on your…
The pontoon trailer guide-ons only come in a set of 2 as that is all that is needed, although you can add more if you believe that it is necessary. That all just depends on how confident you are about staying on the right track once you have started…
The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000lbs #LC672136 has 9 inch diameter round feet so you would need the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4…
We have one trailer tire in the size 5.30-12 that has the higher speed rating you are wanting of 81 mph with the part #TT53012C. Then for a white wheel to use with this we have the part #AM20132. We do not have this tire mounted on a wheel…
The most common 5-bolt trailer wheel lug pattern is 5-on-4-1/2, but since there are actually four different 5-lug patterns in use you will want to refer to the linked article for help determining which you have. You will also want to verify the size…
The Kenda Loadstar ST175/80D13 Bias Trailer Tire #AM3S120 that you referenced is going to close that trailer frame to tire gap by almost a full inch. This would put the new tire much too close to the frame on your Harbor Freight Trailer. The issue is…
