The 2021 Nissan Rogue's have what's called rear automatic braking. It automatically applies the brakes and blares a screeching alarm if something is behind you. This is a great safety feature if you are backing up and someone walks out but it…
That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…
Yes the Inno Square Crossbars part #INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part #TH450. As you know they are a pass…
The Class III hitches we have for your 2022 Nissan Rogue include the Draw-Tite #DT85MR and the Curt #C24HR. I recommend going with the Draw-Tite over the Curt because it sits about 1/2" higher off the ground and the center of the hitch pin hole…
Hey Frederick congrats on the new SUV. To add a hitch to your 2025 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver that…
You are correct that to install the Curt trailer wiring harness #C44ER on your 2021 Nissan Rogue you do not have to take the interior trim completely out. I did see the review from James where he said he didn't have enough wire which is confusing…
I would be happy to! To add a hitch to your 2024 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs…
I have a great solution for you. I confirmed with Curt that they do not have a tongue weight rating for the Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long #C59KR because this adapter is recommended to use for…
Hey Rich, thanks for reaching out! The hitch profiles for a 2022 Tucson and your 2024 Nissan Rogue are different so you unfortunately won't be able to just swap them over. To get a new hitch for your Rogue I recommend picking up the etrailer…
Yes, it does! The Draw-Tite Hitch item #DT85MR has been confirmed to fit the 2024 Nissan Rogue. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing…
Drilling is not required, and you will not need to trim or cut any part of the bumper fascia on your 2023 Nissan Rogue to install either the etrailer or Curt trailer hitches that fit. The hitches that fit are the following part numbers: - etrailer…
You will still be able to use the hands free lift gate sensor on your 2021 Nissan Rogue once the Curt Class II Trailer Hitch Receiver #C57HR is installed, but you will need to place your foot on either side of the receiver for the sensor to detect…
