I recommend installing the etrailer Trailer Hitch Receiver #e72AR on your 2022 Acura RDX. I personally own a 2020 RDX and we tried to install the new Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT89GR on it but there are no holes for it to…
I recommend installing The etrailer Hitch #e72AR on your 2021 Acura RDX. We tried to install the #76902 on a 2020 Acura RDX and there was no holes for it to mount up to and not enough room between the spare tire and the rear fascia to fit it. The…
Hey Kurt, The tech note on the etrailer Trailer Hitch Receiver #e72AR is talking about wheel diameter and not overall diameter of the wheel and tire. Since you have 17" wheels you shouldn't have an issue with a full-size spare.
Hello Berne. Yes, the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e72AR is a great fir for your 2022 Acura RDX. Not only is it a great fit, but our etrailer hitches come in a matte black powder coat finish…
Hi Diane; thanks for the question and if the spare tire is larger than 18 inches it will not be able to be stored under your 2024 Acura RDX when installing any hitch, including the etrailer Trailer Hitch Receiver #e72AR. The foot sensor is not…
Yes, we do! To add a hitch to your 2024 Acura RDX, I recommend the etrailer item #e72AR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity…
I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76268 which is a confirmed fit for your 2021 Acura RDX. In most cases it will not completely interfere with the hands free sensor. You will, however, need to kick your foot to either the…
According to the installation instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver part #76268 which is a fit for your 2019 Acura RDX, the exhaust must be lowered temporarily in order to position the hitch up under the vehicle. If you are…
While we do not have any images of the etrailer Trailer Hitch Receiver #e72AR installed on a 2019 Acura RDX you can see the similar Draw-Tite Receiver #76268 on the images I have included. One of the images is with it installed on a RDX that had the…
The Draw-Tite Class II trailer hitch part #36114 attaches to the RDX frame member using two weld nuts on each side. I've linked the installation instructions for you as a reference. As you can see in the provided photo, the receiver tube does…
I have a solution for you but none of the hitches we offer for your 2019 Acura RDX with Tech Package can be used with a 19 inch spare stored underneath the vehicle. So what your best option would be is replace the spare you have with a smaller one…
In order to find a local dealer for installation purposes, there is a way for you to input your location in order to find dealers close to you. That location for this information is right below the product images and videos. Underneath those…
