Welcome back, Thomas! The Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks - 1-1/4" and 2" Hitches #HLT actually will not fit the Kuat Transfer V2 #KU64FR, so I think that may be the issue you are running into. It can only be used with…
Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 50" Long - Qty 2 #RB1250B-2 (black) and #RB1250 (silver) are compatible with the bare roof on your 2014 Kia Sorrento LX without a vista roof. For a complete roof rack system, you will…
The Curt Trailer Hitch Receiver #C11431 for your 2013 - 2018 Ford Focus ST Hatchback was designed specifically for the ST model and doesn't make contact with the bumper when in use. There hasn't been a redesign according to my tech contact at…
The J-style kayak carrier I recommend that will work on square bars for your trailer is the etrailer J-Style Kayak Carrier #e98878. This will mount around your square bars that are up to up to 3-1/8 inches wide and 1-1/2 inches tall. This is a…
You would not lock out the steering on the vehicle being flat towed. Doing so would cause the wheels to scrub (drag sideways) when turning. The steering needs to be unlocked and the wheels will turn accordingly and straightened back out when needed.…
The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…
If you have a 2017 Ford Focus Hatchback RS you do have a 2" hitch option #306-X7355. Then you can use a platform style rack like the Kuat NV 2.0 #BA22B-BA02B. If that's not the case for you vehicle, then you don't have a 1-1/4 inch hitch…
Hey Paul, good question, and I checked directly with EcoHitch for you, and their hitch is only for the RS. There is an option for a hitch that fits your 2016 Ford Fusion SE Hatchback, and has a completely hidden crosstube, just like the EcoHitch.…
Yes, the Curt T-Connector #C56273 is confirmed to fit your 2018 Ford Focus Hatchback. The installation instructions have been linked for you to check out.
Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…
The Curt Trailer Hitch Receiver #C11431 is designed for and confirmed to fit the Hatchback ST. There will be drilling required for installation, exhaust must be temporarily lowered for installation and access holes may need to be enlarged by…
The Rhino Rack RRRS323B Crossbars have been discontinued by the manufacturer but there are still black - flush look options available for your 2017 Ford Focus. The Rhino-Rack ROC25 Roof Rack for Naked Roofs #RR68MR will fit a 4 door. The Rhino-Rack…
