Videos
for Dodge Durango Owners
Help Articles
for Dodge Durango Owners
Expert Answers
for Dodge Durango Owners
Hey RD. The Replacement Extend/Retract Switch item #LC49MD is not going to work with your Libra 3500 lbs electric jack. It's got four pins and it looks like your jack switch needs five or six. We don't carry Libra jacks and there's no…
view full answer...There are a few options for installing weight distribution on a v-nose trailer, the best of which are the Equal-i-zer Weight Distribution Systems like part #EQ37100ET which although they don't have shorter bars, you can install them so that they…
view full answer...The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…
view full answer...Thank you for the measurements you provided and for the photo of your trailer suspension mockup showing the spring components' spacing. As long as your shackles do not hit the trailer frame (you mention 1/8-inch clearance) you should be fine, but…
view full answer...Hey William, none of the hitches that fit your 2017 Dodge Durango including the TowSmart #TS56ZR will fit with a spare larger than 18 inches unfortunately. If you really need a hitch best option might be to source a smaller spare from a Dodge dealer.…
view full answer...Hey Valerie, I wasn't able to find anything with that model number so in order to find the correct replacement axle I'd need to know the capacity, the hub face to hub face measurement (A), and the spring seat center to spring seat center (B)…
view full answer...The load range D on the Loadstar ST185/80D13 #AM1ST79 actually gives you a higher weight rating than the C load range. For this size D is 1,710 lbs at 65 psi while C is 1,480 lbs at 50 psi. It doesn't hurt to have a tire that is rated for more…
view full answer...To change the 4.80x12 tires on your Karavan 5' x 8' utility trailer to ST175/80D13 tires you will need need to have 5-6" clearance between the top of the tire to the bottom of the fender, and 2-3" between the inside of the tire to…
view full answer...Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…
view full answer...To activate the factory tow package wiring on your 2017 Dodge Durango you will most likely have to take the vehicle to the dealer and they can make it fully functional. Trailer wiring harness #C55515 is designed for models that already have the…
view full answer...We do carry a center cap that fits the 4.9 inch hub bore of the Aluminum Lynx Trailer Wheel - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 #274-000006. The correct part is the following: - Lionshead Trailer Wheel Center Cap #LHCS109-SI60C
view full answer...So on the replacement bleed port #KBPBB with a 1/4 inch -28 screw and 1/8 inch adapter. But I am not sure how you would use it as a tee. Adapter port #K22590A has 1/8" NPT and 3/16" FIF threads and might be a better option depending on the…
view full answer...































