Hello CJ, thanks for reaching out. Based on the towing capacity chart I found online, the bumper pull capacity of a 2011 Ford F350 6.7L SRW Crew Cab is 14,000 lbs. The Curt Adjustable 2-Ball Mount #C99NR has a 10K capacity when used with the 2"…
Well, it worked! I even had another guy come over and give it a read. It is possible that the many years of pushing and pulling on your balls have enlarged the hole they fit in causing the movement you are experiencing. You could disassemble the big…
In order to replace the factory brake controller on a 2016 Chevrolet Silverado 2500 you'd need to cut the blue brake output wire from the harness where it would normally plug into the vehicle side brake controller plug and run this to the rear…
You will likely have to manually run the blue wire from the #3016 wiring harness to the 7-Way trailer connector at the back of your 2016 Chevy Silverado 3500 and replace the wire from the factory controller that will be in the 7 o'clock position…
That is a great question. Both of those are great weight distribution hitches. Between the two, I prefer the Reese Dual Cam II over the Strait Line. The Dual Cam uses an L-bracket to attach to the frame, instead of a chain and lift bracket.…
I wish there were an exact answer to your question but since there are so many variables involved in the wear of an axle it is impossible to determine the lifespan of an axle no matter if it is a torsion axle or a standard axle like part…
The brake controller/tow package connector is located in the black junction box on the firewall above where the driver's left foot would sit and behind the e-brake pedal. You'll need to remove the cover from the junction box, the connector is…
Hi Corey; it does come with the latch but the #TX5976-RearHeader you were looking at is for certain Ford models. If you have the 5-1/2' bed you need the #TX5718-RearHeader. If you have the 6-1/2' bed you need the #TX5727-RearHeader. If you…
I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…
The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…
The only real difference between the Draw-Tite #65052 and Curt #C31012 is the style in which they bolt to the frame. The Draw-Tite is going to have a bolt on each frame rail and one on the crossmember, whereas the Curt is going to have three bolts on…
