Videos
for Tiffin Phaeton Motorhome Owners
Help Articles
for Tiffin Phaeton Motorhome Owners
Expert Answers
for Tiffin Phaeton Motorhome Owners
I'm sorry to hear about your steps and I did check with the manufacturer, Lippert, and the Coachsteps like your 168367 are no longer in production, so the frames by themselves are not available. So you would need a new step assembly, and I was…
view full answer...You are correct since your steps are 29" wide, the only one it could be is the Kwikee RV Electric Steps - 27 Series - item #LC375632. We have a couple of replacement parts but there is no replacement motor. Since you are dealing with so many…
view full answer...Those three regulators are all very similar and essentially do the same thing but they're used on different propane setups. Part #37207-30365 is a vertical regulator. Vertical regulators are commonly on propane systems on travel trailers or pop…
view full answer...I spoke with Lippert and the 158367 didn't come back to anything but 168367 did come up with a 29" Coach Step model. With Coach Step being phased out and replaced with the Kwikee line you'll need the Replacement Steps, Motor, and Control…
view full answer...Bruce, this is fairly common, and the issue is usually with motorhomes that are wired to work with a normally open circuit and the steps being meant for a closed circuit. To fix the issue, you'll just need to use the Replacement Door Switch for…
view full answer...You'll need to grab a multimeter like #PT89ZR and set it to DC voltage and then take a look at your pigtail connector on the motorhome side that connects to the #LC379145. There are four wires for this pigtail; Yellow: 12v Ignition - Retracts the…
view full answer...Hey Bruce, I spoke with Lippert and they ensured me that the Replacement Plunger Door Sensor with Striker Plates for Kwikee Electric RV Steps #LC379388 is a normally closed switch.
view full answer...I do have an option for you but we won't be able to tell you exactly what slide-out seal you need as the trailer manufacturer could have installed a number of different options. The best way to find the correct replacement is by removing a…
view full answer...I called my contacts at our winch suppliers to see if there were any winches available that perform as you requested. I was unable to find a winch that had an auto shutoff when the winch senses a trailer door is closed since winches constantly feel…
view full answer...My contact at Lippert confirmed with me that the replacement step for LCI model 168367 will be the Lippert Kwikee 27 Series Electric Step, #LC375632. The Lippert Kwikee step features an automatic shut-down is step interacts with an obstacle. The step…
view full answer...The problem is you do have the wrong switch for your door sensor. Whenever we hear that the steps are working in reverse that usually means you have the incorrect door switch, normally closed vs normally open or it is installed wrong. For a normally…
view full answer...While I'm not Rachel, I can tell you a compatible replacement for your landing gear motor MQ887 is the following part: - Replacement Motor for Stromberg Carlson Electric Landing Gear #LG-142178
view full answer...