I found your order and see that you arleady purchased: Draw-Tite trailer hitch receiver #75579 Trailer Wiring Harness #HM11141995 Adapter #37185 Brackets #18138 and #18140 All of which will work on your 2018 Grand Caravan and sounds like exactly what…
The Curt hitch that is designed to fit your 2016 Grand Caravan is part #13364. This is a Class lll hitch and it has a 2-inch receiver opening. Curt does require the use of a stabilizing strap like part #18050 when you are using the hitch for any…
The Curt #C13902 multi-fit hitch is designed for full-sized domestic pickups and SUV's, so it wouldn't be a fit for your 2012 Dodge Caravan. I'd recommend a custom-fit hitch like the Curt #13364 Class III hitch which will install without…
For your 2013 Dodge Grand Caravan, you will need to start with a 4-way trailer connection like you mentioned. If you don't already have this, then I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56331.…
There are a couple more differences in the Hollywood Racks Road Runner item #HR520 and the Hollywood Racks Traveler 5 Bike Carrier HR9200 than the included hitch pin and cable lock. The lower brace on the Road Runner provides anchor points for…
It sounds like your Draw-Tite Max-Frame Trailer Hitch Receiver #75579 for your 2008 Chrysler Town and Country may have gotten bent in shipping. We have installed this receiver on several different model years with the stow-n-go seats in our shop…
The hitches offered for the 2013 Grand Caravan and Town and Country set back under the rear bumper at a different distance. The Curt #13364 hitch has a 4 inch distance from the hitch pin hole to the rear most portion of the bumper, while the…
We can absolutely help you find exactly the bike rack they'll need to carry the whole family's bikes. In the event that they don't already have a hitch on their 2014 Honda Odyssey, one will be required to carry 5 bikes. I recommend using…
The Hollywood Racks Road Runner 5 Bike Carrier #HR520 tilts down for easier vehicle access when it is not loaded with bikes. It offers a total bike weight capacity of 150-lbs. In many cases the 5 loaded bikes themselves would prevent the rack from…
I do have a solution, but there is not an adapter that would allow you to replace the OEM connection and keep the factory look on your 2020 Tundra. Since nothing will match that cutout, I have two options that will allow you to use the EZ Connector…
If you are going to change connectors the EZ Connector Magnetic 7-Way Trailer Connector #319-S7-10 would be the route I recommend going. Unlike your 7-way blade and 7-way round connectors this connector does not have any form of tension connector…
To use a magnetic connector you would need to replace the 7-way on the rear of your motorhome with the EZ Connector Magnetic 7-Way Trailer Connector #319-S7-05. You would also install a second #319-S7-05 on the front of your Jeep and use the EZ…
