Videos
for Honda Odyssey Owners
Help Articles
for Honda Odyssey Owners
Expert Answers
for Honda Odyssey Owners
To change the 4.80x12 tires on your Karavan 5' x 8' utility trailer to ST175/80D13 tires you will need need to have 5-6" clearance between the top of the tire to the bottom of the fender, and 2-3" between the inside of the tire to…
view full answer...The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
view full answer...Yes, you can convert the factory 4-way trailer connector to a 7-way connector on your 2008 Ford Expedition. To add the 7-way connector, you will want a 4-way to 7-way adapter, like part #37185. You may also need another 5ft or 6ft of 10 gauge wire,…
view full answer...Hi Greg; we do carry a hitch and wiring for your 2025 Sienna. The best hitch is the etrailer #e56RR. This has a 2" receiver, bolt-on installation, and a matte black powder coat finish. It also comes with a limited lifetime warranty. For wiring…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...It's definitely possible to upgrade a trailer's axle rating to a higher rating by just swapping the axles. To pick out the correct axle you'll need to measure the distance between the hub faces and the spring seat centers and you'll…
view full answer...We have both the 5.3R12 #TT53012C(5.39" x 21.57") and ST145/R12 #AM10130(5.7" x 21.3") which are larger than your current 4.80-12 #TT48012C(4.84" x 20.63") tire on your Karavan 5x8 utility trailer. Unfortuntately I…
view full answer...The Draw-Tite Max-Frame Trailer Hitch Receiver #76025 that you referenced is a great option for your 2015 Honda Odyssey and I like it for the same reason you do. This particular hitch does indeed have a hidden crosstube design so only the 2 inch…
view full answer...I have linked the installation instructions for Draw-Tite Class III hitch #75270 that fits your 2011 Honda Odyssey and the hardware torque specs, as well as a listing of the required tools, is included for your reference. Among other basic tools…
view full answer...I have a solution for you but they don't give us that information. I can tell you that the side to side bolt hole spacing of the etrailer Trailer Hitch item #e98862 is 56.13", center to center. This is the frame width measurement. The bolt…
view full answer...This sounds like a ground problem on the right side. The turn signal not working makes sense because with the brake lights, there is a constant signal coming through which is enough to make the lights illuminate on both sides like they should. But…
view full answer...The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56378 has the second white quick connect and wire to give you the backup camera function. It is a through wire to allow that system to function correctly. If you have…
view full answer...